The main parts of fiber laser engraving machine-Ariel

/in , , , /by

The main parts of fiber laser engraving machine

We will introduce the main parts of fiber laser engraving machine in this article.

Fiber laser engraving machine could achieve deep engraving outcome on the metal.

As we know, the fiber laser marking machine could achieve different outcome on the metal.

For example, the surface marking and deep engraving.

For different requirements of different customers, we introduce the different power machine to them.

The machine parts

Firstly,Laser source: Raycus laser source, the best brand in China.

Lens: 110*110mm lens, wavelength brand from Singapore.

Control card: JCZ control card from Beijng, the best one in China.

Software: EZCAD software, from Beijing JCZ company.

Working table: 2D working table, for focus distance adjust by up-down/forward-backward/left-right moving.

* Galvo head: SINO brand galvo head, the most hot selling one in market.

For the laser source, the two most common type is the Raycus and IPG.

Most western customer and Indian customer prefer the IPG laser source.

And for the lens, also called the working area.

According to our testing experience, the 110*110 working area lens is the most suitable for the deep engraving.

The smaller the lens is , the more concentrated of the light.

So using the 110*110 lens could achieve the best outcome in the short time.

2.consumable parts 

For the fiber laser engraving machine, the only consumable parts of the machine is electricity.

Because The laser source lifetime could reach 100000 hours.

So No any other consumable parts.

Besides, the software and machine is easy to learn and operate.

Therefore, more and more customers buy this machine for working.

If you need other information,pls feel free to contact us.

Email:xintian122@xtlaser.com

whatsapp:0086 17866940010

How to mark different colors on stainless steel-Ariel

/in , , , /by

How to mark different colors on stainless steel

Most of  customers asked to us how to mark different colors on stainless steel by fiber laser marking machine.Today we will talk about it.

For fiber laser marking machine ,you can mark black, white and golden color easily.

 

1.When marking black color, leave the focus above or under the marking face, decrease the laser power to 80% and increase the speed under 100mm/s.

2.When marking white color, leave the focus above or under the marking face,increase the laser power to 40% and decrease the speed under 1400mm/s.

3.When marking face on focus, you can get golden color.

Of course, these area similar parameter, you need test it around them.

As for other colors, this machine also could do it, but it’s hard and we need to test with your material.

In general, It can mark white, gold, and black color on stainless steel and carbon steel. It only can mark color on high quality stainless steel, just like 304.

If you want to mark color, pls better tell us your stainless steel number. We will make detailed parameter for you in advance. Then after you got machine, all will be convenient.

Hope it is helpful for you,if you have any questions of machine ,welcome to contact to us.

Sales manager:Ariel Liu

Mob.whatsapp:+8617866940010

Skype:Ariel-XTLaser 

Email:xintian122@xtlaser.com

Details of Fiber Laser Marking Machine—Oriole

/in , , , /by

Details of Fiber Laser Marking Machine

There are many details of fiber laser marking machine I want to discuss in this text.I will talk about the reason why we use fiber laser marking maching,the components of it and how can we use it.

Fiber laser marking

Fiber laser marking

Why we choose laser marking machine?

Firstly,power saving.For one hour working ,a laser marking machine just cost 0.5kw/h.

Scendly,maintenance-free.A laser marking machine can work for one hundred thousand hours in theory with no maintenance.

Thirdly,simple using.It is easy for us to use it to mark.

Fourthly,mini.It just cover a small area.

Fifthly,permanency.The pattern it marked will never fall off.

Sixly,elegant appearance.What the machine marked looks superior.

Elements and respective roles:

A fiber laser marking machine consists a lot of components.Each of them has its own function.Let us see.

Firstly,fiber laser source.The most important part of the machine.It decides the efficiency and strength of the machine.

Scendly,2D galvo head. Control the movement of the laser beam in the plane.

Thirdly,2D F-theta lens.Scanning and focussing is what it is doing.

Fourthly,control board&marking software.Order the machine to finish its work.

Fifthly,computer.Play a role together with control board&marking software.

Sixly,lifting pillar.It is helpful for the  laser marking machine to focus.

Seventhly,2D working table.We can place the object here and then we can focus easyer.

Eighthly,power supply.When the power of a laser marking machine is fine and open ,we can begin our marking.

How to use the fiber laser marking machine to marking something?

Firstly,open the switch of the computer and then open other three switches.

Scendly,sto make sure it will mark the object on the right position scan and focus .

Finally,operate the software of the machine,and then you will get the pattern you want.

Last but not the least,when you finish your work,you also need abide by the rules.You should close the computer first and then close other switches.

Attention:when you operate the machine if happened anything dangerous ,you can use the emergency stop switch as soon as possible.

 

Mob/Whatsapp:+8613731273956

WeChat:13731273956

Email:xintian161@xtlaser.com

Skype:xintian161@xtlaser.com

web:www.xtlaser.com

 

 

How to use fiber laser marking machine+Jessica XTLASER

/in /by

How to use fiber laser marking machine?

Hello everyone! How to use fiber laser marking machine? To be honest, the operation of fiber laser marking machine is very easy! Today, let me tell you how to use fiber laser marking machine.

Studying how to use it by manual

Firstly, we will send user’s guide online, you can read it and study how to use fiber laser marking machine. Also, the operation manual will be delivery with fiber laser marking machine to customers. When I come to XT LASER company first, I got to how to use fiber laser marking machine taken 3 hours.

Asking for after-sales team

We have professional after sales service team, they can teach you how to use machine online and solve your using problems of machine. They are always online for 24 hours. You can talk with them by Telephone, WhatsApp, Skype or Wechat. Our after sales service has good English, so you don’t need worry communicate with them.

Watching teach videos

We have many teaching videos. Our customers can get usage of machine by watching video. When I first joined XT LASER, I didn’t know anything about machines. And I got how to use fiber laser marking machine by watching teaching videos. If you bought machine, we will send those videos to you.

Fiber based laser marking machine can been used in many industries. We have many customers engaged in firearms industry and jewelry business. For firearms industry, customers use machine to marking on stainless steel material or hard plastic. About jewelry business, fiber laser marking machine can cut gold sheet and silver plate, also fiber laser marking machine can engrave on most metal.

Laser marking machine has 3 main series, including Fiber laser marking machine, Mopa laser marking machine and CO2 laser marking machine, them can do different works. If you want learn more, please feel free to contact me, my WhatsApp ID is: 008615628795913

Laser Cutting Steel/Laser Cutting Aluminum Problems – Elena

/in , , , /by

Although metal cutting operations traditionally employ mechanical or manual processes, laser cutting can be a viable, effective, and cost-efficient option for metal fabrication. Laser equipment is distinct from other cutting machines in both design and application. For example, laser cutters do not make direct contact with material, rely on high-energy power sources, have tighter cutting tolerances, and are generally automated to maximize precision.

Development of laser machine is very difficult. Unlike standard-grade or carbon steel, aluminum and stainless steel are light-reflective and heat-conductive metals. So it can be difficult to fabricate them using a laser cutting process. A possible solution for laser cut aluminum and laser cut steel, involves the use of a higher power setting coupled with compressed gas technology. Using gases in conjunction with cutting operations is fairly common. Nitrogen and oxygen assisted laser cutting machines can shape aluminum and stainless steel at relatively high capacities and with quality edge finishes. However, higher electricity consumption and the cost of peripheral equipment. Such as gas or air filters, can increase expenses for these systems.

Research and Development

Many organizations, such as the Laser Institute of America and Laserlab Europe. Conduct ongoing research to determine the best standard practices and optimal laser applications for a range of materials. Likewise, laser cutting head specifications are continually being revised and adjusted to improve the quality of laser piercing and the cleanness of laser cuts. As laser cutting systems continue to improve in their capacity, production rates, and cost-efficiency. More steel and aluminum laser cutting applications are likely to appear.

https://youtu.be/_WpZkA-tySw

www.xtlaser.com
https://www.cncxtlaser.com/
http://www.xtcnclaser.com/

 

How to use a fiber Laser Marking Machine-Ariel

/in /by

How to use a fiber Laser Marking Machine

How to use a fiber Laser Marking Machine?

Many clients, especially for the first time to use the machine, will have this question.Today we will introduce how to use it.

To know the answer one must know how the fiber laser and the marking system works.

If you know about the laser marking then you probably know that the three most important settings that can be changed to affect how a part is marked are:

Firstly. Speed

The speed is defined by how fast the laser beam can travel to the material.

Speeds of 30 to 35 inches per second could prove to be fine for removing the anodizing on aluminum.

But the deep engraving into the metals will be better accomplished at a speed of 5 inches per second, making numerous passes on the part.

Secondly,Power

The laser can only put out the amount of power as it is designed for.

Excess power out of the laser will allow either more material removal or allow the part to be marked at higher galvo speeds.

A 20 watts laser can only put out 20 watts.

The appropriate amount of power can be assumed according to the to the material being marked and also the desired result.

Thridly, Pulse Frequency
Unless you have a CW laser, the laser puts out pulses of light instead of a continuous beam of light.

Each of these pulses has a very short duration and the pulse time is measured in a nanosecond.

There is a trade-off between the energy per pulse and the number of overlapping pulses.

There are other factors that can impact the quality of the mark such as fill density and spot size.

We  are suppliers of Laser Marking services on various parts throughout different industries.

Hope it will be helpful to you.And if you have any other questions,pls feel free to contact us.

BR.

Ariel Liu

Email:xintian122@xtlaser.com

whatsapp:0086 17866940010

Three focus modes of metal laser cutting machine-Phoebe

/in /by

Three focus modes of metal laser cutting machine

 

The application of a metal laser cutting machine is more and more popular. Three focus modes of metal laser cutting machine

When we use this machine to process different workpieces, we should adopt different focus modes to get the most quality cutting.

1. The cutting focus is above the workpiece

This is also called negative focal length because the cutting point is neither located on the surface of the cutting material,

but located above the cutting material. This focus mode is mainly suitable for cutting high thickness materials.

However, a disadvantage of this mode is that the cutting surface is relatively rough and not very practical for high precision cutting.

2. The cutting focus is inside the workpiece

This is also called focal length, this mode commonly used when you cut stainless steel or aluminum steel workpieces.

But the disadvantages of this focus mode are requiring large airflow,

sufficient temperature, and longer piercing time. So when you process high hardness materials such as stainless steel or aluminum workpieces, you can choose this focus mode.

3. Cutting focus is on the workpiece surface, the cutting machine focus is on the surface of the workpiece.

the workpiece upper and lower surface smoothness is different. Therefore, this mode should be used according to the process requirements.

To sum up, we should use different focus modes to process different workpieces with a metal laser cutter machine, which can give full play to its advantages.

For more useful knowledge about our machine, feel free to contact us.

Three focus modes of metal laser cutting machine-Phoebe

 

WhatsApp: 0086-15014021522

E-mail: xintian120@xtlaser.com

The application of MOPA laser marking machine-Ariel

/in , /by

The application of MOPA laser marking machine

This article is about the application of MOPA laser marking machine .

Many clients are interested in marking colors on stainless steel. We always said it need mopa laser.But why? In fact, MOPA  laser is one of fiber laser, but its Pulse width and Frequency are adjustable.So it can mark different colors on stainless steel.

Many customers are interested in color marking fiber laser marking machine.So why kind of job does the MOPA laser can do?

Firstly,  mark colors on stainless steel

Sometime it also can mark color on brass, titanium, but it is not permanent.

Share some videos for color marking:

Secondly,  can mark on plastic surface.

Thirdly,  can mark black on anodized alumimum.

include ipad back, 

mopa laser marking

https://youtu.be/JuZHzImIU6U

Fourthly,  more flexible than Q-switch

Wavelength laser beam: 1064nm

Mopa laser pulse width: 2-250nm,

Pulse frequency: 1-1000khz

Q-Switch—- Pulse width and pulse frequency are fixed, can not be changed.

Mopa can do all the Raycus’ work.
Mopa has more advantages than Q-switch laser source, and price is little higher than Q-switch.
*.About the laser type
If you only need to mark on aluminium anodised or powder coated materials as below, fiber laser is
enough.

2.If you need to mark black color on anodised aluminum as , you can consider MOPA laser.Fiber laser can only mark white or gray colors on it, not pure black color.

Here is the video link:https://youtu.be/ORCT4Ns6W9A​​​​​​​

 

*About the laser power
If you only need to mark on the surface of the object, 20w is enough.If you also want to have a little depth,30w will be better and its marking speed is faster than 20w. And their prices have no big difference.

If you have any other questions,pls feel free to contact us.

Email:xintian122@xtlaser.com

whatsapp:0086 17866940010

 

Mopa Fiber laser marking machine, JPT M7 new series-Jill

/in , , , , , , /by

Mopa Fiber laser marking machine, JPT M7 new series-Jill

Mopa Fiber laser marking machine,it is more and more popular now.Now it has M7 series.And then, let us introduce more here.

 

1.Firstly,JPT laser source

You  can do research in China market.

The most popular color marking laser source is Mopa JPT brand.

 

2.Secondly,Color series

For color marking series,before there is M1 and M6 series,now JPT stop to manufacture it.

M7 is the update of M1 and M6. However the parameters and color effect is much better than M1 and M6.

For M7,there is 20w,30w,60w,80w,100w,120w,150w,200w.

 

3.And also,Deep engraving series(higher power)

M7 series also replace LM1 deep engraving series.60w,80w,100w,120w,150w,200w.It is good for deep engraving and thin metal cutting.And also,it is good for color marking too.

 

4.And then,Pulse width adjust

There are 16 adjustable width range.Continues、2ns、4ns、6ns、 8ns、13ns、20ns、30ns、45ns、60ns、80ns、100ns、150ns、200ns、250ns、350ns.

So it is good for color marking.

 

5.And also,we listParameteres for M7

20w and 30w:2-350ns;0.8mj;1-4000khz

60w and 100w and 120w:2-500ns;1.5mj;1-4000khz

80w:2-500ns;2mj;1-4000khz

 

6.And also,M1 and M6 parameters FYI.

M1+: 6-200ns; M6+: 2-200ns
Single pulse energy is 0.5mj and frequency is 1-2000KHz.

 

7.Last but not least,Mopa and Q-Switch (Raycus,IPG)

Same:1064nm wavelength laser beam
Difference:
Mopa———Pulse width (2-350/500ns), Pulse frequency (1-4000HZ) .So MOPA laser is more flexible.
Q-Switch—- Pulse width and pulse frequency are fixed, can not be changed.
Pulse width (110-150ns),Pulse frequency(30-100 kHz)

Mopa can do all the Raycus‘ work.
Mopa  > Raycus

 

8.Most of customers from jewelry and firearms guns industry choose 60w M7.

Because it can mark color on stainless steel.At the same time,it can also do the deep engraving work very well.

And then,we list some Color marking videos:

https://youtu.be/seidndP5_nc

https://youtu.be/ii44NOPo5bI

And also,For firearms marking engraving,you can check below article:

Metal deep engraving laser machine,gun firearms laser engraving machine-Jill

60w Mopa JPT fiber laser marking machine,deep engraving cutting fiber laser marking machine-Jill

Fiber laser marking machine,firearms gun deep engraving laser machine-jill

50w mini fiber laser marking machine in USA,Canada-Jill

 

And also,For jewelry marking engraving cutting,you can check below article:

60w Mopa JPT,fiber laser marking machine for gold silver cutting-Jill

 

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

XT Fiber laser marking machine advantage-Phoebe

/in /by

 

XT Fiber laser marking machine advantage

For the fiber laser marking machine advantage, please see the below,

Firstly, Multiple power laser light source, available for many industries, with fast speed, high efficiency, stable output power, high reliability;
Long-life, maintenance-free within 100,000 hours, operated in 24 hours and severe working condition and High electro-optic conversion efficiency, little energy coupling loss, less power consumption with just 0.5 KW/Hour; Small and compact size, easy to carry, save production space.

XT Fiber laser marking machine advantage,for the service, we have 24 hours full after-sales service and engineering department. Also OEM service customized and OEM orders are welcome due to our abundant experiences. All the OEM services are free.

It is these excellent performances that make the current optical fiber laser equipment more and more widely used. In some fields, the traditional processing methods have been adopted, and the constantly improved and upgraded technologies are constantly beating the market occupied by the traditional industry. On the price, the price of optical fiber laser marking machine is much more expensive than traditional equipment, but the excellent performance and lower maintenance costs, won the favor of many industries. Especially for high hardness, high melting point, brittle material marking more obvious advantages.