Advantages of enclosed laser cutter–Oriole

/in , , /by

Advantages of enclosed laser cutter

Nowadays more and more people choose laser cutter to finish there metal cutting work. The requirement is higher and higher. Enclosed type laser cutter is hot selling now. Today we will show you some advantages of enclosed laser cutter.

             Advantages of enclosed fiber laser cutter

Firstly, one of advantage of fiber laser cutter is safe

Fully enclosed & when the door is open, it won’t work. Standard door protection switch.
Standard two cameras to ensure safe production, inside & back of cover.
A converter to control the exchangeable table( up and down, parallel shift), helpful for protecting operator.

Secondly, enclosed laser cutter is environmental friendly & clean workshop

Two directions for fume exhaust( upward & downward) to protect the cutting head, etc.
Normally Australian manufacturers choose to buy another dust/fume extraction together with enclosed cutter to ensure the clean environment in workshop.

Thirdly, fiber laser cutter is efficient & profitable

Partition dust removal: remove dust in stages according to the using area, save energy & reduce emissions. Exchangeable table, cutting while uploading and unloading. Save your time, more productive within same time, profitably.

Finally, easy to operate

FSCUT 2000 Cypcut control system, easier to operate.
Modular blade, easy to replace and strong bearing capacity, up to 1200kgs.

Any interests welcome to contact us when you are free.

Whatsapp/Wechat:008613731273956

Comparison between 6kw and 12kw fiber laser cutting machine-Teresa

/in , , , /by

Comparison between 6kw and 12kw fiber laser cutting machine

12kw fiber laser cutting machine VS 6kw fiber laser cutting machine

1. Cutting speed

carbon steel cutting by 6kw and 12kw

For carbon steel, the cutting speed of 12 kW is 88% -567% faster than 6 kW.

stainless steel cutting by 6kw and 12kw

For stainless steel, the cutting speed of 12 kW is 163% -289% faster than 6 kW.

Also taking the cutting of 5mm stainless steel as an example, the 12kw fiber laser cutting machine works continuously for 24 hours, which is equivalent to the 6kw fiber laser cutting machine working continuously for 2.7 days, and the 3000w laser cutting machine working continuously for 4.4 days.

Conclusion: 12kw has faster cutting speed and higher production efficiency than 6kw. It means customers can cut more parts than other manufacturers in the same time.

For sheet metal cutting, the delivery time can measure the processing level to a large extent. The shorter the delivery time, the higher the customer satisfaction and the stronger the market competitiveness. For self-produced and self-sold customers, faster processing speed means higher parts delivery efficiency, and can easily meet the demand for increased production capacity.

2. Advantages of cutting carbon steel with air

12kw fiber laser cutting machine cutting with air

12kw fiber laser cutting 6-14mm carbon steel with air is 181% -567% more efficient than cutting with oxygen

Conclusion: Air can be used when cutting 6-14mm carbon steel, save on oxygen by ensuring cutting speed, thus to save more gas cost.

High power laser cutting machine can use air to cut thin plates, and the cutting effect can be guaranteed. Air is much cheaper than Oxygen, this will further reduce the cost of use and enhance the profitability of the company.

3. Cutting effect

12kw fiber laser cutting compared to 6kw

Conclusion: 12kw has better cutting effect than 6kw

The high power laser cutting machine has a better cross-section and a smaller taper. At the same time, it can cut a wider thickness of the bright surface. It can complete the bright surface cutting of 30mm carbon steel. Customer is more satisfied with the finished product.

cutting effect of 12kw fiber laser cutting machine

Main advantages of high power fiber laser cutter

From the comparision, you can know what’s the main advantages of high power fiber laser cutter:

  1. Faster cutting speed, higher production efficiency, help customers gain more orders
  2. Can cut thin plates with air, save more gas cost
  3. The cutting effect is better, less slag/ burr and more shining surface
  4. The rejection rate is much lower than lower power, it can save more plates for customers and reduce the production cost and wasteage.

For more information about high power fiber laser cutting machine, please do not hesitate to conatct XTLASER.

Email: xintian105@xtlaser.com

Whatsapp/Mob: +8615006829603

Facebook: https://www.facebook.com/teresa.ren.754

Do you know the fiber laser cutters:Jill

/in , /by

Do you know the fiber laser cutters

Do you know the fiber laser cutters.

1530H fiber laser cutting machine

 

Actually,there are so many people want to buy fiber laser cutting machine.But you really know fiber laser cutting machine?Why you want to buy fiber laser cutter? Try to think about your cutting requirement

Firstly, if you want to cut metal plate and tube,then go on to know the fiber laser cutting machine.

And think about what the specific material and thickness you want to cut?for the maximum cutting thickness, how many hours you want to cut per day?cause for every kind of machine,fiber laser,CO2,or plasma or YAG,etc,different powers have the limit cutting capacity. For machines,if always under the limit cutting situation,is not good for machine life time.So i think if we buy one machine,we need take good care of it,right? Then take one example for you: if your cutting limit is 4mm stainless steel,and everyday need 8hours to cut it,750w power can do it,but it is the maximum cutting thickness.So you need choose a higher power,1000w.That is the right way to have a machine,and make it work longer.

Secondly,you also need to know the fiber laser cutting machine is suitable for you or not?

Cause more and more customers know fiber laser cutting machine now,but they don’t really know. Someone follow others steps,someone just need price. For example,if you want to cut 20mm stainless steel,and 20mm carbon steel,fiber laser cutting machine is not suitable for you.Although the fiber laser technology is more and more better,for thick stainless steel,20mm,also hard to cut it,need 15000w.Cost is really higher.I think it is no necessary to have one fiber laser machine. I suggest that maybe you can buy one 3000w or 4000w fiber laser machine to cut 20mm carbon steel,and stainless steel below 10mm, the thicker stainless steel you still can use your old machine,like water jet,CO2,etc. Do not waste any source of you already have.

Finally,the fiber laser cutter can not instead of the traditional machines totally now,maybe in future.

Hope my information is helpful for you.

Any confusions,you can contact me.

Whatsapp:+8613046033839

Email: xintian143@xtlaser.com

Aluminum steel fiber-laser-cutting-machine:Jill

/in /by

Aluminum steel fiber-laser-cutting-machine

Aluminum  steel fiber-laser-cutting-machine.

Lets go on our topic of how to find one suitable fiber laser cutting machine to cut aluminum,stainless steel,carbon steel,brass,cooper,etc.

Actually,in Chinese market,maybe you can find that the machine shape looks almost same,but the price with a large difference. Thats surprised you,right?

Many of my friends ask about this situation before their purchasing,and always want to choose one cost-effective one,thats normal for any buyers.

When i buy something from Amzon or Alibaba ,i always compare the price and quality before buying,thats necessary.

And in China, there is one proverbs is that you get what you pay for.

I noticed that many suppliers prefer to share their machine pictures with the buyers,to show that they really have the machine.

Yes,they have the machine,but you have to focus on if they are factory or just one trading company. Maybe they show you many machine pictures,but they have show you their factory? they have invited you to have a visiting of their factory to see the real machine cutting process,to see the machine quality ?

Well, even if they take you to their machine factory,but you can sure thats their factory?

Its too difficult to judge it,but you can know it according to their talking with others in factory.

If they are in good relations,say hi to everybody,almost they are from this factory.

After you know they are real factory,then focus on their factory strength.

The amount of the machines,the staffs of the factory,the service of the company,of course,the most important is the machine quality.

How to judge the quality?

Firstly to ask their machine configuration sheet,to know about their brand of configuration,to see the configuration sheet is professional,complete or not.

Then to see the real machine,to make sure the real machine configuration is the same with the sheet.

Thirdly,to check the configurations cost,if the machine with higher configurations,but the price is too lower than others,so pls focus on the false higher configurations or they will send you machine without some parts to balance their cost.

Finally,the cutting process,as a great machine,the cutting will be not with any black border.

And for that time,maybe there is just several factories you can choose.Then to compare the price and the quality,to choose one honest,reliable supplier with good quality.

Finally,if you want to know more about the fiber laser cutting market and machine.

Contact us:

Email:xintian143@xtlaser.com

Whatsapp:+8613046033839

Maintenance of fiber laser cutter–Oriole

/in , , , , , /by

Maintenance of fiber laser cutter

More and more company choose laser cutter,  we will show you maintenance of fiber laser cutter in this article.

1. Lens cleaning for fiber laser cutting machine maintenance

Fiber laser cutter

Fiber laser cutter

The cutting head of the fiber laser cutting machine has protective lenses, focusing lenses, etc., whose function is to reflect and focus the laser light from the laser head through the lens. The lens is prone to dust and other contaminants, resulting in laser loss or lens damage.
Maintenance method + cycle: check the lens every two months, check the protective lens or focusing lens before going to get off work every day, if there is dust and other contaminants, use a professional cleaning cloth and absolute ethanol to wipe gently in the same direction, if there is If damaged, replace it immediately.

2. Water tank cleaning for fiber laser cutting machine maintenance

Before the fiber laser cutting machine works, the water quality of the water cooler tank must be checked. The water quality and temperature of the circulating water directly affect the service life of the laser.
Maintenance method + cycle: regularly replace the circulating water and clean the water tank. Replace it every six months or before long-term use.

3. Fan cleaning for fiber laser cutting machine maintenance

The use of the fan on the fiber laser cutting machine for a long time will cause the fan and air duct to accumulate a large amount of solid dust, which will cause the fan to generate a lot of noise, and it is also not conducive to dust removal and deodorization.
Maintenance method + cycle: loosen the connection hose clamp between the exhaust pipe and the fan, remove the exhaust pipe, and clean the dust in the exhaust pipe and the fan. Clean the fan once a month.

4. Guide rail cleaning for fiber laser cutting machine maintenance

Rails and racks are one of the core components of the equipment, and their function is to guide or support the equipment. During the operation of the equipment, due to the large amount of dust and smoke generated during the processing of the workpiece, the smoke and dust will be deposited on the surface of the guide rail and the frame for a long time, which will affect the processing accuracy of the equipment.
Maintenance method + cycle: first wipe the original lubricating oil and dust on the guide rail and the frame with a non-woven cloth, and then replace the new guide rail lubricating oil. Clean the guide rails and racks once a month.

5. Maintenance of screws and couplings

After the fiber laser cutting machine has been working for a period of time, the screws and couplings at the motion connection are easy to loosen, which affects the stability of the mechanical motion. Therefore, it is necessary to observe whether the transmission parts have abnormal noise or abnormal phenomena during the operation of the machine, and promptly Contact the manufacturer for adjustment and maintenance.
Maintenance method + cycle: regularly communicate equipment and maintenance matters with the manufacturer. Check the noise and abnormality of transmission components once a month.
The above is the maintenance analysis of fiber laser cutting machine. The main products of Xintian Laser include laser cutting machine, full CNC hydraulic bending machine, laser welding machine, laser marking machine and laser application automation equipment, etc., which are used in sheet metal processing, chassis Cabinets, lighting, mobile phones, 3C, kitchenware, sanitary ware, auto parts machining and hardware industries.

Any interests welcome to contact us when you are free.

Oriole

Whatsapp/Wechat:008613731273956

Operating cost of fiber laser cutter–Oriole

/in , , /by

Operating cost of fiber laser cutter

Fiber laser cutter

              Fiber laser cutter

For many small companies, it would be a relatively large investment if they use multiple or one laser cutting machine. Many factories can indeed appreciate the advantages of metal fiber laser cutting machines, but there are also many people who think that the cost of laser cutting is still relatively large. When it comes to laser cutting, it is already a familiar term in the processing industry, so many people think The metal laser cutting machine is suitable for large enterprises in terms of cost. Let’s take a look at how high the cost of the metal laser cutting machine is. Is it what we imagine?

The metal laser cutting machine is currently the latest type of laser cutting equipment. The laser cutting machine has higher cutting speed, better cutting quality and lower use cost. The metal laser cutting machine has high power from 1000w to 20000w. But the metal laser cutting machine has great advantages in thin sheet metal cutting. The cutting efficiency is far better than other laser cutting equipment on the market, which improves the stability of the system and reduces the equipment’s cost. The amount of maintenance, therefore, greatly reduces the maintenance cost of the equipment. There are some important reasons to control its cost.

Let’s take a look at how to control the cost of laser cutting machine operation. The cost of metal laser cutting machine in cutting is also very low, accounting for only about 1/8 of the same kind of CO2 laser cutting machine. The hourly use cost of metal laser cutting machine is about 30-40 yuan, while CO2 laser cutting The machine is about 200-240 yuan per hour. At the same time, because the cutting speed of the optical fiber laser cutting machine is very fast, it is nearly 300 times higher than that of the wire cutting. Therefore, the metal laser cutting machine creates a very low cost. A higher value. Nearly 80% of the cost of using laser cutting machines comes from the consumption of gas.

 

Any interests welcome to contact us for more information.

Oriole

Whatsapp/Wechat:008613731273956

What is the Advantages of IPG laser source?-Ivy

/in /by

What is the Advantages of IPG laser source?

 

What is the Advantages of IPG laser source? IPG laser sources have some big advantages over other laser sources. The following are the advantages of IPG laser sources.

Firstly, IPG is a pure import laser source. It is made in Germany, Russia and the United States, but generally shipped randomly.

Secondly, it has a high photoelectric conversion rate and increased production capacity, up to 45%, while Raycus or Maxphotonics brands are only around 25%. This leads to lower production costs and, in the long run, higher profits for customers.

And because it’s a German brand, quality is guaranteed. Laser power attenuation is slow. Using the machine for longer can create greater value for the user.

The high market share of IPG reflects brand strength and quality to some extent. Many large foreign enterprises, such as Bystronic, LVD and so on are using IPG laser.

There is also its low failure rate, only 3% of the failure rate, such a low failure rate to ensure that your production is not affected.

IPG’s lasers can also see the output power in real time.

IPG has been established for a long time, with a very complete after-sales system and after-sales service points all over the world, so that problems can be solved in time.

IPG also has an official public account: IPG Fiber Laser
It can calculate IPG and other brands of electricity calculation, to help customers calculate the cost of use.

These are the advantages of IPG lasers over other brands of lasers.

If you are interested, please feel free to contact me.

xintian108@xtlaser.com

How to save the lifetime of lens in laser cutting head? – Ivy

/in /by

How to save the lifetime of lens in laser cutting head?

How to save the lifetime of lens in laser cutting head?

As we all know, one of the most important components of the fiber laser cutting machine is the laser cutting head with the characteristics of high precision and high price.

The life of the laser cutting head does not affect the operating efficiency of the cutting machine, but also the production cost and benefits of the factory.

What’s more, the most common problem affecting the life of the cutting head is the pollution damage of the optical lens inside the structure.

Today, we will teach how to maintain the optical lens of the laser cutting head.

The possible reasons of lens contamination of laser cutting head

1.The fiber head installation method is incorrect in the cutting head.

For this reason, the main solution is to choose the correct fiber laser head installation method.

Most installers tend to assemble freely the cutting heads, tilting the fiber-optic head installation direction, resulting in inadvertent installation.

We should try to keep the fiber head horizontally installed inside the cutting head and lock it during the installation process.

Besides that we can try to operate in a clean environment avoid dust from rising during the installation process.

Or we can choose to operate in the morning to prevent dust from entering the cutting head.

2.The cutting head itself has a poor sealing effect

For the sealing of the cutting head, it is not always possible to guarantee complete sealing.

Then, a feasible method is to install a breathing system to maintain the internal pressure of the cutting head.

3.Incorrect replacement of the protective window case

Due to the relatively large volume of the protective mirror box, particles are inevitably mixed during the replacement process.

Therefore, we must change the speed  when replacing the protective mirror box.

And we should seal the window with tape or other film.

4.Unreasonable cutting head consumables used

The selection of qualified protective mirrors and “O” type sealing rubber ring can ensure the sealing of the cutting head and prevent the entry of dust particles.

5.Improper laser cutting machine operation

When operating the laser cutting machine, we must strictly follow the equipment instructions and requirements and operate correctly.

Reduce the impact of improper handling on the cutting head.

6.Poor maintenance of the cutting head

The cutting head should be as clean and dry as possible and cleaned regularly.

Metal cutter fiber laser machines:Jill

/in /by

Metal cutter fiber laser machines

Metal cutter fiber laser machines.

3KW Full enclosed fiber laser cutting machine-Nancy

https://youtu.be/PKzbEe7rjWQ

https://youtu.be/kIxYITB47xo

Before purchasing,we need to know some details of product.It is necessary.

1.Why more and more customers choose fiber laser to cut metal?

The most important is the Photoelectric conversion rate is higher.

For example, if you use plasma or CO2 machine to cut 10mm steel,the electrical consumption is about 1kw,but for fiber laser,it just need 0.6kw.

So after the customers use and calculate,use fiber laser cutting machine can save USD22000-USD26400 cost within 3 years.

It is not a few consumption!!!!

And our customers said,use fiber laser is to improve the cutting efficiency,cause for each hour,the quantity we make more,the profit we get more.
Usually they can get all of the machine cost back within half year.

2.For the limit cutting,usually the speed is slowly,and the cutting edge with little slag,and the cutting side with laser trace.You can take it into consideration.

3.And for fiber laser cutting machine,most customers worry about the machine operation,but we are a factory,not a trading company.

We have the after sales department.

It is to support you when customers get the machine,5 online engineers,15 overseas engineers for installation and training.

Our engineer will go to your factory to install and train for you.And you do not need to pay extra salary to engineers,only need to pay the tickets,hotel and food.

Online way include the whatsapp,skype,wechat talking,video talking,phone call,remote control,emails.
What we need to do is to make sure the reputation of partners.

So if you want to buy fiber laser cutting machine,contact us.

A professional supplier will offer you the suitable solution.If they only offer you a price,they just want to sell to you.Not support you.

Be careful on such suppliers.They want money from you.

Finally,more info,contact us.

Whatsapp:+8613046033839

Thick metal fiber laser cutting machine:Jill

/in /by

Thick metal fiber laser cutting machine

Thick metal fiber laser cutting machine.

https://youtu.be/tzfCY6Cf5Cs

https://youtu.be/0QcEtxcA2sY

https://youtu.be/ntmy2DYbqHo

As industrial production needs change, laser cutting has become more and more popular.

Laser cutting machine is  an important means to promote the upgrading of traditional industries.But it still faces a huge bottleneck of insufficient application and backward core technology.

Especially in the process of cutting metal slabs, the cutting speed will be significantly slowly.

And the reproducibility of the slits is not good enough to compete with conventional techniques.

If the laser cutting machine can overcome the difficulties in the thick plate cutting process, there will undoubtedly be a greater market prospect.

Carbon steel plate perforation problem.

In the processing of thick plates, the perforation time accounts for a large proportion. Laser manufacturers have developed rapid perforation technology, which is more representative of high-energy perforation (deep holes). The advantage of this method is that it is fast.

However, the drawback is that the enormous energy injected during the perforation causes the temperature of the sheet to rise,which in turn affects the subsequent overall cutting process and affects the processing of small shapes.

With a small power pulse for perforation, the time is very long (12 seconds).Which leads to a decrease in the efficiency of cutting and an increase in unit cost.

Cutting surface quality problem.

We often encounter Figure 1. and Figure 2. show the cutting section when processing medium-thick plates. Such cutting is not only affect the quality of product, but also with over-burning and severe slag, so that it does not reflect high prices.

The value of laser processing machines is different from other cutting methods.

If you are looking for fiber laser cutting machine to cut metal.Contact us.

XTLASER is always here to support customers.

Whatsapp:+8613046033839