Characteristics of fiber laser cutting machine and future development prospect-Juicy

Characteristics of fiber laser cutting machine and future development prospect

The special and future development prospect of fiber laser cutting machine.

Characteristics of fiber laser cutting machine.
Fiber laser is the development of a new type of fiber laser output in the world of high energy density laser beam.

Gathered in the workpiece surface, the workpieces is super fine focus light irradiation area moment melting and gasification.

Move the light to shine through numerical control mechanical system and automatic cutting.

Compared with huge gas laser and solid state laser has obvious advantages.

It has gradually developed into a high precision laser machining, laser radar system.

Characteristics of fiber laser cutting machine.

But the important candidates in the field of space technology, laser medicine and so on.

So fiber laser cutting machine it  is cut, also can do the bevel cutting processing.

And edge neat, smooth.

But the  suitable for cutting metal plate and so on high precision processing.

So at the same time combined with mechanical arm and  three-dimensional cutting instead of the original import five-axis laser.

Compared with ordinary carbon dioxide laser cutting machine.

It can save more space and gas consumption, and the photoelectric conversion rate is high.

which is a new product of energy conservation and environmental protection.

Its cutting advantages:

1.High cutting precision:

The positioning accuracy of laser cutting machine is 0.05mm, and the repeated positioning accuracy is 0.03mm.

2.The laser cutting machine has a narrow slit:

The laser beam focuses on a small point of light.

So which makes the focal point reach a high power density.

The material is quickly heat to he degree of gasification.

And the pores are formed by evaporation.
Then with the relative linear motion of the beam and the material, the slit width of the hole is very narrow.

And the width of the incision is generally 0.10-0.20mm.

3.The cutting surface of laser cutting machine is smooth:

The cutting surface has no burr

But the surface roughness of the incision is generally control within Ra6.5.

4.The speed of laser cutting machine is fast:

Then the cutting speed can reach 10m/min and the maximum positioning speed and  can reach 30m/min faster than that of wire cutting.

5.Laser cutting machine cutting quality is good:

No contact cutting, trimming heat effect is very small,

But almost no thermal deformation of workpiece.

So the completely avoid material formed when punching and shearing edge collapse.

But generally do not need secondary processing kerf width.

6.No damage to the workpiece:

The laser cutting head will not contact the surface of the material to ensure that the workpiece is not scratched.

7.It is not affected by the shape of workpiece:

The laser processing is flexible, process any figure

Cut the pipe and other profiles.

Laser cutting machine can cut a variety of materials.

So such as plastic, wood, PVC leather and textiles and organic glass, etc.

9.Save mould investment:

laser machining without mould, no mould cost, do not need to repair the mould, mould replacement time saving,

So as to save the processing cost.

But reduce the production cost and especially for large products processing.

10.Material saving:

Then computer programming can use to cut different shapes of products to maximize the utilization of materials.

11.Improve the delivery speed of the sample:

So after the product drawing is form.

laser processing carry out immediately.

And the new products can obtain in the shortest time.

12.Safety and environmental protection:

The laser processing waste is low, the noise is low, clean, safe, pollution-free, greatly improve the working environment.