Příspěvky

Brass fiber laser cutting:Charry

/in , /by

Brass fiber laser cutting

Brass fiber laser cutting.

The metal laser cutting machine can cut various of materials.And the application in the cutting of copper products has gradually promoted in recent years. For the cutting of copper products, many workers have many problems for the specific operation and adjustment of the metal laser cutting machine. Cutting is not just the use of machine cutting, but also some experience problems. Let us introduce you specifically. How to cut brass material with a metal laser cutting machine.

High-reflective metal materials is always difficult materials for metal laser cutting machines.Including copper, aluminum, gold and other metal materials. These materials are also common materials in our daily processing. Solving metal laser cutting machine cutting high-reflection materials is more important.Nowadays, many metal laser cutting machine manufacturers are thinking about the solution.

When cutting a highly reflective metal material requires the addition of an auxiliary gas.When the laser cutter cuts the metal copper, the add auxiliary gas reacts with the material at a high temperature condition to increase the cutting speed.For example, oxygen can be to achieve the combustion-supporting effect. Nitrogen is an auxiliary gas for improving the cutting effect for laser cutting equipment. For copper materials below 6MM, metal laser cutting machine can cut it completely.

Therefore, when using a metal laser cutting machine, there is no need to worry about whether it can cut it off or not. At this time, it is necessary to pay attention to the processing effect.So it is best to use nitrogen as the auxiliary gas. When the thickness of the metallic copper reaches 2 MM, it cannot cut it with nitrogen. At this time, need add some oxygen.To oxidized the brass,then we can cut it.

Brass fiber laser cutting video:

If you need to cut carbon steel,stainless steel and brass,then tell us the different material thickness.

Cause brass is hard to cut.If the same thickness,like 3mm.3mm carbon steel,500w is enough.But for brass,1000w is okay.

If you only need to cut brass,then we need to think about nLIGHT laser source.

It is more stable to cut brass,aluminum,etc.

More info about fiber laser cutting machine,contact us.

Whatsapp:+8618253165863

Fiber laser cutting machine materials:Charry

/in , /by

Fiber laser cutting machine materials

Fiber laser cutting machine materials

Fiber laser cutting machine materials

Materials Analysis
With the development of laser cutting technology, the field of laser cutting is more and more extensive, and more and more applicable materials are use.

Structural steel

The material will give better results when cut with oxygen. When oxygen as a process gas, the cutting edge is slightly oxidized. For plates up to 4 mm in thickness, high pressure cutting can be perform with nitrogen as the process gas. In this case, the cutting edge will not be oxidize. For plates with a thickness of more than 10 mm, special electrodes are for the laser and the surface of the work piece can oil during processing to obtain better results.

stainless steel

Cutting stainless steel requires: use of oxygen, where edge oxidation does not matter. use nitrogen to obtain an oxide-free, burr-free edge that does not require further treatment. The coating film on the surface of the plate will get better perforation without reducing the processing quality.

aluminum

In spite of the high reflectance and thermal conductivity, aluminum materials with a thickness of 6 mm or less can cut, depending on the alloy type and laser capability. When cut with oxygen, the cutting surface is rough and hard. With nitrogen, the cutting surface is smooth. Pure aluminum is very difficult to cut because of its high purity. The aluminum can only cut when a „reflection absorbing“ device is on the system. Otherwise the reflection will destroy the optical components.

Fiber laser cutting machine materials

titanium

Titanium plates are cut with argon and nitrogen as process gases. Other parameters can refer to nickel-chromium steel.

Copper and brass

Both materials have high reflect and very good thermal conductivity. Brass with a thickness of 1 mm or less can cut with nitrogen. copper with a thickness of 2 mm or less can cut, and the processing gas must be oxygen. Copper and brass can only cut when a „reflection absorbing“ device is on the system. Otherwise the reflection will destroy the optical components.

More details you can contact us:

Email:xintian111@xtlaser.com

Whatsapp:+8618253165863

Happy Father’s Day Metal Cutting&Engraving Manufacturer-Jennifer

/in /by

Happy-Father’s-Day-From-Metal-Cutting-Engraving-Manufacturer-XT LASER.

Every responsible company will know the importance of thanks-giving. Tomorrow will be the Happy-Father’s – Day. XT LASER, the direct manufacturer of metal engraving & cutting & welding machine, is also pay more attention to this day.

Father’s Day is the not only the day for father, but also the day for thanks-giving. Thanks for every client’s choosing from XT LASER, not only the machine quality, but also the recognition of our brand.

Today, our engineer just back to office from Indian market with the installation and training service for the Metal-Cutting-Engraving-Machine.

and the followings are the pictures for your reference:

 

 

 

 

 

 

 

Here is the origin of Father’s day, hoping it can be helpful for u.

Father’s Day, contrary to popular misconception, was not established as a holiday in order to help greeting card manufacturers sell more cards. In fact when a „father’s day“ was first proposed there were no Father’s Day cards!

Mrs. John B. Dodd, of Washington, first proposed the idea of a „father’s day“ in 1909. Mrs. Dodd wanted a special day to honor her father, William Smart. William Smart, a Civil War veteran, was widowed when his wife (Mrs. Dodd’s mother) died in childbirth with their sixth child. Mr. Smart was left to raise the newborn and his other five children by himself on a rural farm in eastern Washington state. It was after Mrs. Dodd became an adult that she realized the strength and selflessness her father had shown in raising his children as a single parent.

The first Father’s Day was observed on June 19, 1910 in Spokane Washington. At about the same time in various towns and cities across American other people were beginning to celebrate a „father’s day.“ In 1924 President Calvin Coolidge supported the idea of a national Father’s Day. Finally in 1966 President Lyndon Johnson signed a presidential proclamation declaring the 3rd Sunday of June as Father’s Day.

Father’s Day has become a day to not only honor your father, but all men who act as a father figure. Stepfathers, uncles, grandfathers, and adult male friends are all honored on Father’s Day.