Příspěvky

fiber laser marking Machine cutting brass jewelry materials-Max

/in , /by

fiber laser marking Machine cutting brass jewelry materials

Following are brass cutting samples made by fiber laser marking machine

Now i would like to introduce you our newest model of laser engraving machine in 2018.

It equips with newest laser technology and advanced screen. It will extend the using life of laser machine.  And it will become easier to control.

Following is the cutting video of brass cutting by fiber laser marking machine.

 

Excellent beam quality

The optical fiber laser uses the medium mixed yb double-clad fiber with resonant cavity length.

So the beam quality is very good. And M2 value is 1.1. The output flare diameter can achieve 10 microns.

Excellent beam quality can ensure that optical fiber laser marking machine can get in a variety of material satisfying marking effects.

Meanwhile it is widely applied in most metal marking industries (such as brass, titanium, steel, iron, aluminum and so on)

and non metal materials like cloth, fabric, PVC, MDF, leather, acrylic, plastic and etc.

 

Laser long service life

Optical fiber laser marking machine use 1064 nm laser diode. So its average working hours can up to 100000 hours.

Small and exquisite Volume , applicable in the bad environment

Optical fiber surface area/volume ratio is high. And it is also good cooling effect. Meanwhile it does not need huge water cooling system and just simple air cooling.

So it can be running in bad conditions, such as high impact, high vibration, high temperature, dirt under the conditions of the normal operation.

Free maintenance operation

Optical fiber laser does not need for any maintenance (not including adjust or clean lens)

By the way, we are looking for partners and distributors of laser marking, cutting, welding and cleaning in global.

 

More details will be updated soon. Your bookmark will be the biggest encourage for me.

My email: xintian109@xtlaser.com  whatsup： 0086 18353156659

Where is the nLIGHT’S advantage in Brass laser cutting – XT LASER

/in /by

Where is the nLIGHT’S advantage in Brass laser cutting

The followings are the main advantages of nLIGHT laser source

Two major questions during using laser source:

  1. Condensation of moisture
  2. Two ways to avoid the condensation of moisture for the country with humid climate, Pakistan included:

Traditional way: offering the air-condition in a special room;

 Disadvantage: A. Room space needed;

  1. Cost of establishing the air-condition room:
  2. nLIGHT’s creative way: CDA (clean & dry & air):

nLIGHT : By providing the arid and condensed air (Getting rid of dew);

nLIGHT :Humidity sensor will be installed in the laser source. If it attained to the dew condition, the alarm will be started and only when the the condensed air is pumped, the alarm can be cleared.

2. Metal dust caused by cutting process:

1.Taking advantage of the outside pressure difference, can get rid of dust  inside of laser source:;(Air compressor+Air dryer.)  (Their costs are quite low.)

(Especially for the metal dust, there will be hard to clean in the laser source, and pressure difference can avoid this).

Using this, normal producing can be guaranteed even under the bad working environment. (High reliability ) Thus the condensed air will be better recommended than Germany IPG;

Three advantages of nLIGHT laser source in brass laser cutting:

  1. Professional target at high-reflective materials, such as aluminium, brass, copper, gold and sliver. Because a special protective cover is embed in the the laser source, which can protect the laser source:
  2. Better after-sales service ability in brass laser cutting.

– The big company such as Germany IPG, the supporting and servicing ability for middle-and-low terminal customers is hierarchical and different. IPG can not support live maintenance service with long maintenance service cycle;

– Laser source provider, like nLIGHT will no such a service concept. We will give the best and wholly-minded service to every customer . And it can support live maintenance service(per specific situation).

3. Extended warranty. nLIGHT offer warranty even in brass laser cutting.

Fiber laser metal cutting machine

Above all advantage, so nLIGHT laser source have wide application on high reflective cutting. And the main reflective material main include brass, aluminum, copper etc. Also this is the most common cutting material except steel. Compared with other brand laser source, nLIGHT also offer warranty if laser source rise problem when cut brass and aluminum.

So if you need cut brass and aluminum, nLIGHT laser source will be the best choice

Contact person: Alex Wang

Email address: xintian104@xtlaser.com
Whatsapp & Wechat: 0086 18766152065
Skype: saint512406

1mm brass pendants(names, animals etc) cutting By Fiber Laser Marking System-Max

/in /by

Brass pendants cutting By Fiber Laser Marking System

Following is samples of fiber laser marking system cutting 1mm brass pendants.

  

  

Now i would like to introduce you our newest model of 2018.

It equips with newest laser technology and advanced screen. It will extend the using life of laser machine.  And it will become easier to control.

Excellent beam quality

The optical fiber laser uses the medium mixed yb double-clad fiber with resonant cavity length.

So the beam quality is very good. And M2 value is 1.1. The output flare diameter can achieve 10 microns.

Excellent beam quality can ensure that optical fiber laser marking machine can get in a variety of material satisfying marking effects.

Meanwhile it is widely applied in most metal marking industries (such as brass, titanium, steel, iron, aluminum and so on)

and non metal materials like cloth, fabric, PVC, MDF, leather, acrylic, plastic and etc.

Laser long service life

Optical fiber laser marking machine use 1064 nm laser diode. So its average working hours can up to 100000 hours.

Small and exquisite Volume , applicable in the bad environment

Optical fiber surface area/volume ratio is high. And it is also good cooling effect. Meanwhile it does not need huge water cooling system and just simple air cooling.

So it can be running in bad conditions, such as high impact, high vibration, high temperature, dirt under the conditions of the normal operation.

Free maintenance operation

Optical fiber laser does not need for any maintenance (not including adjust or clean lens)

By the way, we are looking for partners and distributors in global.

More details will be updated soon. Your bookmark will be the biggest encourage for me.

My email: xintian109@xtlaser.com  whatsup： 0086 18353156659

Brass material cut by fiber laser cutting machine-Max

/in /by

This article shows that how fiber laser cutting machine works on Brass material.

As laser technology develops rapidly,  fiber laser cutting machine has occupied the metal processing market in the global.

Laser cutting machine is not only used in the emerging field, but also in the field of traditional machining. It has replaced the traditional inefficient machine tools, such as plasma, flame cutting, water cutting, band sawing, wire cutting, shearing machine, punching machine and so on. It is really an unbelievable market.
① The world’s machine ownership about 20 million units, plasma, flame cutting, water cutting, band sawing, wire cutting, shears, punching, etc. will not be less than one-tenth. It is around 200 million units;
② China’s domestic sales of laser cutting machine in 2017 is more than 6,000 units.

Following is the Galvanized sheet samples and videos by fiber laser cutting system.

laser growth of fiber laser cutting machine

From the market growth analysing, we can know that the laser market is the fastest growing one in the next five years. And high power fiber laser with kilo watt level will be much more popular. And the lasers have obvious advantages. It is widely used in kind of metal processing industry. Especially it plays an important role in metal processing field in future. That is to say the world of lasers will have a huge demand. Also fiber lasers will maintain a steady growth rate.

After reading all above information,  welcome to contact us: 

Email: xintian109@xtlaser.com  skype: xtlaser10   Mobil/whatsup:0086 18353156659

Thank you! Best regards

Laser cutting machine for which materials-Anne

/in , /by

Fiber Laser cutting machine for which materials

Fiber Laser cutting machine quality, technology unique. Today we talk about those materials suitable for use in a laser cutting machine.
1, carbon steel-fiber laser cutting machine

so Laser cutting machine can cut the maximum thickness of 12mm steel plate, the use of advanced laser technology, good beam quality, slotted small, smooth cutting surface. Cutting carbon steel plate 6mm or less just blowing air, without the need for oxygen-blown. Users significant savings of oxygen

2, stainless steel cutting-fiber laser cutting machine

so Our company has developed a laser cutting machine can cut a maximum thickness of less than 6mm stainless steel. Cutting sheet metal cut a small slit accuracy of about 0.1 to 0.2, the surface without burr, the advertising industry has been widely used word.

3, alloy steel plate

so XT LASER can laser cutting machine can cut most of steel, good edge quality.so

4, aluminum, copper and other nonferrous metals

so XT LASER laser cutting machine performance non-ferrous metals aluminum, copper and achieved a major breakthrough, aluminum laser cutting machine developed. Cutting aluminum, copper greatly increased speed compared with before cutting aluminum increased by 4 times, cutting copper increased by 5 times, cutting thickness also increased significantly, aluminum cutting maximum thickness of 6mm, the cutting surface is shiny and smooth.so

5, other metal materials cutting-fiber laser cutting machine

so Laser cutting machine is suitable for a variety of non-contact cutting sheet metal, hollowing and drilling process. With high precision, high speed, etc., become the direction of sheet metal processing technology development.so

Sales manager:

Anne Zhang

Whatsapp/Mob:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

Welcome to contact us .

Laser Cutting Machine Technology How To Deal With Burrs?-Anne

/in , , /by

Laser Cutting Machine Technology How To Deal With Burrs?

Fiber Laser cutting machine processing sheet metal burr what is the reason?Here we give you a simple analysis.

The working principle of fiber laser cutting machine, analysis of the resulting burr causes and solutions.

First, the focus of the beam position deviation.–fiber-laser-cutting-machine

Solution:adjust the focus position, according to its offset position to adjust

 

Second, the output power of the machine is not enough.–fiber-laser-cutting-machine

Check whether the fiber laser cutting machine works properly. If not normal, it needs to repaire and maintain machine in time. If normal, check whether the output value is correct or not.

 

Three, the cutting speed of the fiber laser cutting machine is too slow–fiber-laser-cutting-machine

Solution: timely adjust and improve the speed of wire cutting

 

Four, the purity of the auxiliary gas of the fiber laser cutting machine is not enough.–fiber-laser-cutting-machine

Solution: improve the purity of the auxiliary gas

 

Five, the cutting point of the laser beam of the cutting machine has shifted.–fiber-laser-cutting-machine

Solution: focus debugging, timely adjustment

 

Six, laser cutting machine operation time is too long to produce instability–fiber-laser-cutting-machine

Solution: close the machine, restart and let the machine rest

 

The main reason of burr in laser cutting machine.when the laser cutting machine is working the workpiece, the laser beam irradiates the high energy produced on the workpiece surface,

so that the workpiece surface vaporization rapidly, and evaporation, to achieve the purpose of cutting. But there is a core device, we must attach importance to auxiliary gas.

The auxiliary gas is when the workpiece surface irradiation after gasification, blew the slag on the surface of workpiece,If the auxiliary gas is not used, the slag will be cooled and the burr will be formed on the cutting surface.

This is the main reason for burr formation

Another reason is the quality of the equipment itself, as well as the parameter setting factors, all customers after the purchase of laser cutting machine, must be professional operators debugging equipment.

So it’s important to choose a quality factory with good after-sale service .

Solution to burrs in sheet metal processing by laser cutting machine;

1.must be equipped with air compressor, the use of auxiliary gas to cut.

2.Find a professional operator debug laser cutting machine parameters until normal.

 

How To Choose Laser Cutting Machine Lens?-Anne

/in , , /by

How to choose fiber laser cutting machine lens?

Protective lenses, as the name suggests, is used to prevent dust and slag splash, protect the focus lens.-fiber laser cutting machine

Other than those used in fiber laser cutting machines.

they are also necessary for other laser equipment including laser marking,laser welding and laser engraving . Visible, the application of protective lenses market is very large.

Select the laser cutting machine lens protection three steps-fiber laser cutting machine

1) Overall dimensions match, this is easy to understand;

2) Materials, according to different laser power, consider the use of cost.you can choose K9, quartz, in the practical application process,

professional manufacturers  divide into two types of material into multiple levels.customers can choose the appropriate specifications according to actual needs.

3)Coating, laser antireflection film, according to the use of different coating technology parameters.

Although the protective lens of fiber laser cutting machine is vulnerable parts,

in order to improve its utilization rate and reduce the production cost.

You can clean the lens by regular cleaning, to achieve the purpose of recycling,

Here are three cleaning steps summarized by XT LASER:

1)Protective lens material is ZnS (zinc arsenic), more brittle, afraid of falling.-fiber laser cutting machine

Pay attention to when dismantling: can not be too hard, can not collide with hard object.

Anti-reflective film on the surface, afraid of pollution, afraid of wet, afraid of oily, afraid of scratch.

It is required in the work to provide dry, to the oil air, do not directly handle laser cutting machine lens protection lenses, because the skin will have a permanent fat on the lens surface damage.

Instead, you can work with gloves and its special kit, and for smaller lenses, optical tweezers or vacuum tweezers are more convenient.

No matter what method to clip the laser cutting machine to protect the lens,must follow the non optical surface clamping,  such as the frosted edges on the mirror plaque.

2)Under normal circumstances, before and after cleaning are required to check the laser cutting machine to protect the lens.

Because most of the contaminants and surface defects are relatively small in size, we often need to magnify the equipment when examining the lenses.

In addition to enlarging the equipment, sometimes we need to illuminate the optical surface with a brighter beam of light, enhancing the specular reflection of surface contaminants and defects, making it easier to spot contaminants and defects.

3)When cleaning a laser cutting machine to protect the lens, often use a clean wipe paper and optical grade solvent to prevent damage by other pollutants.

Use wet wipe the paper , do not dry to use.

In the softness of the consideration, the available wipe paper is cotton Webril wipe paper or cotton ball, lens paper, and cotton applicator applicator.

 

https://www.xtlaser.cz/product-item/all-in-one-xtc-f1530s/

 

fiber-laser-cutting-machine

Essential Guide to Fiber Laser Cutting Machine part 3–Doris

/in , /by

Essential Guide to Fiber Laser Cutting Machine

Let’s continue the fiber laser cutting machine, hope what we post can help you to find the reasonable fiber laser cutting machine.

fiber laser cutting machine

fiber laser cutting machine

3-D Design Software Options

Autodesk Fusion – An excellent all-in-one solution for professionals working collaboratively on product design,

this cloud-based platform functions for both PC and Mac and is free to use for startups, enthusiasts and hobbyists.
Solidworks – Engineering 3D design software with diverse modules that support all types

of product development – take advantage of packages for electrical design,

real-world condition simulation and a product data management system that

promotes quality and documentation in your design process.

 

What Can We Make with Laser Cutting?

You’ve got the software to create designs and a laser cutting machine that’s ready to use –

but what can you really make with laser cutting? XT Lasers has provided manufacturing and prototyping services for diverse industries. We’ve helped with prototyping for medical devices, automotive and firearm parts, semiconductors, electronics and more.
Laser cutting isn’t just for big industries though – it’s also for hobbyists, artists, and makers of all kinds. Take a look at these project ideas and the materials we can use to make them come to life.

fiber-laser-cutting-machine

fiber-laser-cutting-machine

Firstly,Wedding Invitations

– If you’re an event planner looking to add

value with eye-catching invitations,

laser cutting paper is a fantastic option. Use two-dimensional design software to create intricate cut-out designs and impress your clients – and their guests.

Secondly, Jewelry

– Laser cutting metal is the perfect way to create pendants, earrings, necklaces, brooches, and just about any other wearable metal accessory. For even more aesthetic options, combine laser cutting and etching to add laser-drawn designs to any piece once it’s form by laser cutting.

Thirdly, Custom Coasters

– Coasters are a great housewarming gift, and laser cutting acrylic or wood is a great way to make them. There’s nothing more thoughtful than a gift that’s custom-design and creat by laser cutting wood to your exact specifications. We’d recommend amber bamboo or another light-colored wood.

Fourthly, Key chains, Badges, Business Cards

– You’ll never find yourself limited by designs or materials when creating with lasers, especially when you use versatile materials. Laser cutting acrylic is a preferred option for many makers – acrylic is lightweight, highly durable, and easily sliced through with precision laser cutting techniques.
Design your own razor-thin acrylic or aluminum business cards with a unique look and feel, create conference badges and ID tags that won’t be damaged in the wash, or design custom keychains in a variety of colors.

fiber laser cutting machine

fiber laser cutting machine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Conclusion

If you feel your inner creative coming out, that’s a great sign. Laser cutting is one of the most powerful technologies we have available today, allowing anyone with access to a computer to design their own products and make them come to life in less time and at a lower cost than ever before. With immense versatility in materials and design specifications,

it’s tougher to figure out what you can’t do than what you can – and that’s the way we like it.
Thousands of entrepreneurs and businesses around the world are using laser cutters to innovate new products every day – will you be next?

 

Email: xintian103@xtlaser.com

Skype: xtlaser103

Whatsapp/Wechat/Cell: 008615990992073

 

 

 

 

What should we pay attention to cutting round hole of laser cutting machine-Anne

/in /by

What should we pay attention to cutting round hole of laser cutting machine

More and more enterprises begin to use laser cutting hole, because the laser processing of flexibility and high efficiency .

500W fiber laser cutting machine idle speed of 90 meters per minute cam meet needs of high-speed cutting

in addition, the hole section of the laser processing is more smooth,

the hole diameter can also modify the infinite, meet the diverse needs of the factory.

 

However, with a laser cutting machine processing hole is not very simple, but need some skills.

Let the laser engineers give you analysis of the reasons and matters needing attention

 

Not suitable for air blowing of fiber laser cutting machine

The blowing process, when the pressure is too small will appear scraping the edge of slag, carbonization.

the pressure is too large and easy to burst holes.So this requires process proofing division and machine perfect fit, with experience to select the appropriate pressure.so that the cutting hole is more full.

Circular hole is too small of fiber laser cutting machine

Laser cutting machine cutting hole is the best option hole ratio of 1:1, that is to say the proportion of pore size and thickness is 1:1.

of course,this ratio means that the bigger the aperture is, the easier it is to cut the high quality round hole.

Otherwise, when the energy of the fiber laser cutting machine is insufficient, the cutting hole is easy to break out of the breakpoint and the circular hole is not round.

 

Servo motor parameter error of fiber laser cutting machine

Sometimes there will be a hole elliptic or irregular phenomenon,this is related to the mismatch of XY axis motion.

The direct cause of XY does not match the motion parameters of the servo motor is not appropriate adjustment.

Therefore, the quality of cutting round hole also has certain requirements for servo motor.

Precision error of guide rail and lead screw of fiber laser cutting machine

If the servo motor parameter error affects the cutting quality, then the precision error of the guide rail and lead screw will lead to the accuracy of the circular hole can not reach the expected.

So it is very important to choose high quality with Premium Brands .

Welcome to visit XT LASER.

Products

Introduce XTC-F1530S XT LASER Fiber laser cutting machine -Catherine

 

fiber laser cutting machine ,fiber laser cutting machine for stainless steel

fiber laser cutting machine for pipe

Where is the nLIGHT’s advantage in Brass Laser Cutting – Jennifer

/in /by

Where is the nLIGHT’S advantage in Brass laser cutting, The followings are the main advantages of nLIGHT laser source:

Two major questions during using laser source:

  1. Condensation of moisture

  2. Two ways to avoid the condensation of moisture for the country with humid climate, Pakistan included:

Traditional way: offering the air-condition in a special room;

 Disadvantage: A. Room space needed;

  1. Cost of establishing the air-condition room:
  2. nLIGHT’s creative way: CDA (clean & dry & air):

nLIGHT : By providing the arid and condensed air (Getting rid of dew);

nLIGHT :Humidity sensor will be installed in the laser source. If it attained to the dew condition, the alarm will be started and only when the the condensed air is pumped, the alarm can be cleared.

2. Metal dust caused by cutting process:

1.Taking advantage of the outside pressure difference, can get rid of dust  inside of laser source:;(Air compressor+Air dryer.)  (Their costs are quite low.)

(Especially for the metal dust, there will be hard to clean in the laser source, and pressure difference can avoid this).

Using this, normal producing can be guaranteed even under the bad working environment. (High reliability ) Thus, the condensed air will be better recommended than Germany IPG;

Three advantages of nLIGHT laser source in brass laser cutting:

  1. Professional target at high-reflective materials, such as aluminium, brass, copper, gold and sliver. Because a special protective cover is embed in the the laser source, which can protect the laser source:
  2. Better after-sales service ability in brass laser cutting.

– The big company such as Germany IPG, the supporting and servicing ability for middle-and-low terminal customers is hierarchical and different. IPG can not support live maintenance service with long maintenance service cycle;

– Laser source provider, like nLIGHT will no such a service concept. Every customer will be given the best and wholly-minded service. And it can support live maintenance service(per specific situation).

3. Extended warranty. Service can be further guaranteed by joining this activity in brass laser cutting.

 

Contact person: Jennifer Sun

Email address: lasermachine01@xtlaser.com
Whatsapp & Wechat: 0086 15169105376
Skype: xtlaser01@gmail.com