Příspěvky

Laser Cutting Machine Technology How To Deal With Burrs?-Anne

/in , , /by

Laser Cutting Machine Technology How To Deal With Burrs?

Fiber Laser cutting machine processing sheet metal burr what is the reason?Here we give you a simple analysis.

The working principle of fiber laser cutting machine, analysis of the resulting burr causes and solutions.

First, the focus of the beam position deviation.–fiber-laser-cutting-machine

Solution:adjust the focus position, according to its offset position to adjust

 

Second, the output power of the machine is not enough.–fiber-laser-cutting-machine

Check whether the fiber laser cutting machine works properly. If not normal, it needs to repaire and maintain machine in time. If normal, check whether the output value is correct or not.

 

Three, the cutting speed of the fiber laser cutting machine is too slow–fiber-laser-cutting-machine

Solution: timely adjust and improve the speed of wire cutting

 

Four, the purity of the auxiliary gas of the fiber laser cutting machine is not enough.–fiber-laser-cutting-machine

Solution: improve the purity of the auxiliary gas

 

Five, the cutting point of the laser beam of the cutting machine has shifted.–fiber-laser-cutting-machine

Solution: focus debugging, timely adjustment

 

Six, laser cutting machine operation time is too long to produce instability–fiber-laser-cutting-machine

Solution: close the machine, restart and let the machine rest

 

The main reason of burr in laser cutting machine.when the laser cutting machine is working the workpiece, the laser beam irradiates the high energy produced on the workpiece surface,

so that the workpiece surface vaporization rapidly, and evaporation, to achieve the purpose of cutting. But there is a core device, we must attach importance to auxiliary gas.

The auxiliary gas is when the workpiece surface irradiation after gasification, blew the slag on the surface of workpiece,If the auxiliary gas is not used, the slag will be cooled and the burr will be formed on the cutting surface.

This is the main reason for burr formation

Another reason is the quality of the equipment itself, as well as the parameter setting factors, all customers after the purchase of laser cutting machine, must be professional operators debugging equipment.

So it’s important to choose a quality factory with good after-sale service .

Solution to burrs in sheet metal processing by laser cutting machine;

1.must be equipped with air compressor, the use of auxiliary gas to cut.

2.Find a professional operator debug laser cutting machine parameters until normal.

 

How To Choose Laser Cutting Machine Lens?-Anne

/in , , /by

How to choose fiber laser cutting machine lens?

Protective lenses, as the name suggests, is used to prevent dust and slag splash, protect the focus lens.-fiber laser cutting machine

Other than those used in fiber laser cutting machines.

they are also necessary for other laser equipment including laser marking,laser welding and laser engraving . Visible, the application of protective lenses market is very large.

Select the laser cutting machine lens protection three steps-fiber laser cutting machine

1) Overall dimensions match, this is easy to understand;

2) Materials, according to different laser power, consider the use of cost.you can choose K9, quartz, in the practical application process,

professional manufacturers  divide into two types of material into multiple levels.customers can choose the appropriate specifications according to actual needs.

3)Coating, laser antireflection film, according to the use of different coating technology parameters.

Although the protective lens of fiber laser cutting machine is vulnerable parts,

in order to improve its utilization rate and reduce the production cost.

You can clean the lens by regular cleaning, to achieve the purpose of recycling,

Here are three cleaning steps summarized by XT LASER:

1)Protective lens material is ZnS (zinc arsenic), more brittle, afraid of falling.-fiber laser cutting machine

Pay attention to when dismantling: can not be too hard, can not collide with hard object.

Anti-reflective film on the surface, afraid of pollution, afraid of wet, afraid of oily, afraid of scratch.

It is required in the work to provide dry, to the oil air, do not directly handle laser cutting machine lens protection lenses, because the skin will have a permanent fat on the lens surface damage.

Instead, you can work with gloves and its special kit, and for smaller lenses, optical tweezers or vacuum tweezers are more convenient.

No matter what method to clip the laser cutting machine to protect the lens,must follow the non optical surface clamping,  such as the frosted edges on the mirror plaque.

2)Under normal circumstances, before and after cleaning are required to check the laser cutting machine to protect the lens.

Because most of the contaminants and surface defects are relatively small in size, we often need to magnify the equipment when examining the lenses.

In addition to enlarging the equipment, sometimes we need to illuminate the optical surface with a brighter beam of light, enhancing the specular reflection of surface contaminants and defects, making it easier to spot contaminants and defects.

3)When cleaning a laser cutting machine to protect the lens, often use a clean wipe paper and optical grade solvent to prevent damage by other pollutants.

Use wet wipe the paper , do not dry to use.

In the softness of the consideration, the available wipe paper is cotton Webril wipe paper or cotton ball, lens paper, and cotton applicator applicator.

 

https://www.xtlaser.cz/product-item/all-in-one-xtc-f1530s/

 

fiber-laser-cutting-machine

What should we pay attention to cutting round hole of laser cutting machine-Anne

/in /by

What should we pay attention to cutting round hole of laser cutting machine

More and more enterprises begin to use laser cutting hole, because the laser processing of flexibility and high efficiency .

500W fiber laser cutting machine idle speed of 90 meters per minute cam meet needs of high-speed cutting

in addition, the hole section of the laser processing is more smooth,

the hole diameter can also modify the infinite, meet the diverse needs of the factory.

 

However, with a laser cutting machine processing hole is not very simple, but need some skills.

Let the laser engineers give you analysis of the reasons and matters needing attention

 

Not suitable for air blowing of fiber laser cutting machine

The blowing process, when the pressure is too small will appear scraping the edge of slag, carbonization.

the pressure is too large and easy to burst holes.So this requires process proofing division and machine perfect fit, with experience to select the appropriate pressure.so that the cutting hole is more full.

Circular hole is too small of fiber laser cutting machine

Laser cutting machine cutting hole is the best option hole ratio of 1:1, that is to say the proportion of pore size and thickness is 1:1.

of course,this ratio means that the bigger the aperture is, the easier it is to cut the high quality round hole.

Otherwise, when the energy of the fiber laser cutting machine is insufficient, the cutting hole is easy to break out of the breakpoint and the circular hole is not round.

 

Servo motor parameter error of fiber laser cutting machine

Sometimes there will be a hole elliptic or irregular phenomenon,this is related to the mismatch of XY axis motion.

The direct cause of XY does not match the motion parameters of the servo motor is not appropriate adjustment.

Therefore, the quality of cutting round hole also has certain requirements for servo motor.

Precision error of guide rail and lead screw of fiber laser cutting machine

If the servo motor parameter error affects the cutting quality, then the precision error of the guide rail and lead screw will lead to the accuracy of the circular hole can not reach the expected.

So it is very important to choose high quality with Premium Brands .

Welcome to visit XT LASER.

Products

Introduce XTC-F1530S XT LASER Fiber laser cutting machine -Catherine

 

fiber laser cutting machine ,fiber laser cutting machine for stainless steel

fiber laser cutting machine for pipe

The fastest way to choose your fiber laser cutting machine with right power ?–Kevin

/in , /by

The fastest way to choose your fiber laser cutting machine with right power ?

        Now more and more factories start purchasing fiber laser cutting machine for their sheet metal working jobs, but some times they meet the problem that which kind of power they should consider and use for their cutting jobs, now let’s see the following cutting parameter form to make it clear and choose the right power machine for your factories.

Material 500 w

Cutting limit

Clean cut

 700 w/750 w

Cutting limit

Clean cut

 1000 w

Cutting limit

Clean cut

 1200 w

Cutting limit

Clean cut

 2000 w

Cutting limit

Clean cut

 3000 w

Cutting limit

Clean cut
Carbon steel 8 mm

6 mm

 10 mm

8 mm

 12 mm

10 mm

 14 mm

10 mm

 16 mm

14 mm

 20 mm

16 mm
Stainless steel 3 mm

2 mm

 4 mm

3 mm

 6 mm

4 mm

 6 mm

5 mm

 8 mm

6 mm

 10 mm

8 mm
Aluminium 1 mm

1 mm

 3 mm

3 mm

 4 mm

3 mm

 4 mm

3 mm

 6 mm

5 mm

 8 mm

8 mm
Brass 1 mm

1 mm

 2 mm

2 mm

 3 mm

2 mm

 3 mm

2 mm

 6 mm

5 mm

 8 mm

8 mm
Copper 0.5 mm

0.5 mm

 2 mm

2 mm

 3 mm

2 mm

 3 mm

2 mm

 4 mm

3 mm

 6 mm

4 mm

Firstly

You just need to check the  clean cutting thickness and the cutting limit thickness you want for your cutting job requirements, so you can confirm the power of the laser cutting machine you need.

Secondly

You need to check the cutting area you want, we have standard machine with cutting area 500 mm x 400 mm,1300 mm x 900 mm. 1500 x 3000 mm,2000 mm x 4000 mm,2000 x 6000 mm, you can choose the one you want.

Finally

We have open type machine and machine with protective cover , automatic exchange table to improve production efficiency, you can choose the one according to your actual demand.

 

laser cutter

Of course, we also have pipe fiber laser cutting machine, plate and pipe all in one type fiber laser cutting machine  for your kind reference.

If you have any enquires of our fiber laser cutting machine, please contact me by the following information:

Kevin Sun 
Jinan Xintian Technology Co.,Ltd  (XT LASER) 
| Add:No.316 Xinggang Road,Jinan city,Shandong province,China.
|Cellphone:008615053145819                         |www.xtlaser.com
|Tel:+86 531 88558038                                       |Email: xintian101@xtlaser.com
|Whatsapp:008615053145819                         | Skype: lasermachine01
Youtube:  https://www.youtube.com/c/KevinXTLASER
Facebook: https://www.facebook.com/cnlasermachine

 

 

Kitchen Ware Metal Laser Cutting Machine – Alex

/in /by

Metal Laser Cutting Machine have a wide application in Kitchen industry. it is closed to our daily life and continue to update and rise recent years. In the kitchen processing industry, such as range hoods, gas appliances, stove panels, large-scale commercial kitchen utensils. sheet metal panels us used large. The traditional process production requires a lot of mold, design and manufacturing cycle. It will spend a long time and high cost, but  low efficiency. Fiber metal laser cutting machine can reduce costs and improve work efficiency to meet the kitchen industry needs.

Metal Laser Cutting Machine Samples

Metal Laser Cutting Machine Samples

Kitchen Ware Metal Laser Cutting Industry

With social and economic development, people have higher and higher demand on the daily necessities and utensils. Both require unique shape, but also requires functional and durable. The traditional processing methods such as cold punching, cold cutting, shear plate, punching and other ways. They have large pollution for environmental and have many cutting burrs. So they need do secondary processing until it able to meet the needs of customers and market. fiber metal laser cutting machine have obvious advantage in the kitchen industry.

Metal Laser Cutting Machine Advantage

1.  fiber laser cutting machine have a series of features,such as good beam quality, high precision, small slot, low material cost, smooth cutting surface and safe operation etc. It can complete the arbitrary piece of material sheet metal cutting quickly and satisfactorily. It reduce the number of skilled workers, and eliminate the rising cost of labor costs. Meantime the work efficiency is also improved greatly. Each month we can save tens of thousands of outsourcing processing fees so that we can recover the metal laser cutting machine cost quickly.

2. Fiber laser cutting machine not only solve above problems in kitchen ware industry, but also can process of the panel samples quickly and easily. It reduce the cost of new product development and shorten the development cycle of new products.

3. Fiber laser cutting machine have very high cutting precision. It enhance the yield of range hood and gas appliance, then reduce the loss of materials. For some special-shaped molding products, it have a unique advantage.

If you hope to learn more on kitchen ware fiber laser cutting machine, you can contact us directly.

Alex Wang

Email: xintian104@xtlaser.com

Mobile&Whatsapp: 0086 18766152065

Skype: saint512406

What are the performance advantages of fiber laser cutting machine?

/in /by

In recent years on the international market ,Fiber laser cutting machine, a new invention of a new type of cutting machine products, this cutting machine products, whether in cutting speed, or in the mechanical volume has an absolute advantage, today we mainly Talk about the main advantages of the fiber laser cutting machine performance reflected in what areas.

First, advanced cutting technology

This new type of fiber laser cutting machine used in the cutting principle is a high-performance laser cutter, in the process of cutting the laser will emit countless high-performance, high-energy laser rays, the laser generated by the huge energy , The instantaneous cutting of the surface can be vaporized, so that you can easily cut off a very hard interface. At present this process is also a most advanced cutting process, no other cutting process can go beyond it, and this cutting process in the cutting process which is very fast, you can instantly very thick steel plate easily cut, and cutting The accuracy is also very accurate, cutting the cross-section accuracy can reach a few millimeters or so, can meet some of the high demand for cutting needs.

Cutting 6mm carbon steel by Fiber laser cutting machine

Second, the cutting performance is very stable

This laser cutter in the cutting process, which is extremely stable use of the world’s top lasers, the life of this laser will last for several years, and in the use of the process in addition to human factors, almost no Any system itself is faulty, so even if the laser cutting machine under long working pressure, it will not produce any vibration or other adverse effects.

Third, the mechanical operation process is very convenient

In the process of using fiber laser cutting machine, all the information dissemination and energy transmission are transmitted through the fiber, in this way to carry out the greatest advantage of transmission is to save a lot of manpower and resources, in the transmission process which is not Will produce any light path leakage phenomenon. But also in the use of equipment without any optical path before the adjustment, you can easily transfer energy to the laser which.

Fourth, the size of the machine itself is very small

This laser cutter has only one core component, a laser that emits lasers, and the laser is very compact and does not occupy as much space as any other type of cutting product, so that the overall volume of the machine is reduced Much smaller, whether it is in the process of mechanical production or transport which can be reduced for us a lot of manpower and resources.

Where to buy high quality fiber laser cutting machine in China ?

 

Technical Parameters for XT LASER fiber laser cutting machine:

Fiber Laser Cutting Machine Technical Parameters
Laser Type
Fiber laser
Laser Brand
IPG / Raycus
Laser Power
500W (750W / 1000W / 2000W optional)
Working area
1500mmX3000mm 1300x2500mm Optional
Working Table
Fixed Working Table
Control System
PMAC full-closed loop servo control
Driving Mode
Double gear rack driving
Idle/Processing Speed
72m/min / 36m/min
Positioning Accuracy
0.05mm
Protection System
Enclosure protection
Laser Head
Precitec / Laser Mech / XT Laser
Power Supply
AC220V ± 5% 50 / 60Hz / AC380V ± 5% 50 / 60Hz
Total Power
7KW~11KW
Floor Space
5.6mX3.2m (fixed table)
Standard Collocation
Metal nesting software, dual-pressure gas route of 3 kind gas sources, dynamic focus, remote controller, etc.
Software
CutMax Laser Cutting Software or PA8000 software, Metal Nesting Software
Supported Format
PLT, DXF, BMP, AI, DST, DWG, etc.
Fiber Laser Cutting Machine Related Models

 

Contact Information:

Email: xintian112@xtlaser.com

Skype: evaxtlaser

Mobil : 0086 15006516821(Whatsapp)

Web: www.xtlaser.com