Příspěvky

CO2,Fiber laser cutting machine using:Charry

/in , /by

CO2,Fiber laser cutting machine using

CO2,Fiber laser cutting machine using.

Firstly. From the laser device structure to compare

In carbon dioxide laser cutting technology, carbon dioxide gas is a medium that generates a laser beam. However, fiber lasers are transmitted through diodes and fiber optic cables. The fiber laser system generates a laser beam by pumping multiple diodes and then transmits it to the laser cutting head through a flexible fiber optic cable instead of transmitting the beam through a mirror. This has many advantages, starting with the size of the cutting table. In the gas laser technology, the mirror must be set within a certain distance, and unlike the fiber laser technology, there is no range limitation.

And even the fiber laser can be installed next to the plasma cutting head of the plasma cutting bed. Carbon dioxide laser cutting technology does not have this option. Also, the system is more compact due to the ability of the fiber to bend when compared to a gas cutting system of the same power.

Secondly. Compare the conversion efficiency of electro-optical light

The most important and significant advantage of fiber-cutting technology should be its energy efficiency. With fiber laser complete solid-state digital modules and a single design, fiber laser cutting systems have electro-optical conversion efficiencies higher than carbon dioxide laser cutting. For each power unit of a carbon dioxide cutting system, the actual general utilization is about 8% to 10%. For fiber laser cutting systems, users can expect higher power efficiency, between 25% and 30%. In other words, the fiber-optic cutting system consumes about three to five times less energy than the carbon dioxide cutting system, resulting in an increase in energy efficiency of greater than 86%.

Thirdly. Compare from the cutting effect

Fiber lasers have short-wavelength characteristics that increase the absorption of the beam by the cutting material and enable the cutting of materials such as brass and copper as well as non-conductive materials. A more concentrated beam produces a smaller focus and a deeper depth of focus, so that fiber lasers can quickly cut thinner materials and cut medium-thickness materials more efficiently. When cutting materials up to 6mm thick, the cutting speed of a 1.5kW fiber laser cutting system is equivalent to the cutting speed of a 3kW CO2 laser cutting system. Since the operating cost of fiber cutting is lower than the cost of a conventional carbon dioxide cutting system, this can be understood as an increase in output and a decrease in commercial cost.

Finally. Compare from maintenance costs

Fiber laser cutting is more environmentally friendly and convenient on machine maintenance issues. Carbon dioxide gas laser systems require regular maintenance; mirrors require maintenance and calibration, and the resonators require regular maintenance. On the other hand, fiber laser cutting solutions require almost no maintenance. Carbon dioxide laser cutting systems require carbon dioxide as a laser gas. Due to the purity of carbon dioxide gas,need clean it regularly. For a multi-kilowatt CO2 system, this item requires at least $20,000 per year. In addition, many carbon dioxide cuts require high-speed axial turbines to deliver laser gas, while turbines require maintenance and refurbishment.

So if you are looking for solution of metal cuttingm,hope it is useful.

Email:xintian111@xtlaser.com

whatsapp:+8618253165863

What’s the difference between Co2 galvanometer VS Co2 CNC Machine?-lisa

/in , , , /by

What’s the difference between Co2 galvanometer VS Co2 CNC Machine?-lisa

At the time of engraving non-metal materials like wood, acrylic, paperboard, leather, denim, and other materials. The CO2 laser technology is the most common option. However, this technology divided into two different types of machines, one is the CO2 laser galvanometer technology. And the other is the CO2 laser CNC technology. We are going to explain what is the main difference,

The outlook is different

     

Both machines use a glass tube or metal tube as the power source. when we take a look at these machines indeed their main structure is different. The Galvanometer CO2 laser has the laser tube right behind the head, while the CNC laser has the tube back of the main structure.

The structure plays an important role when we want to cut material

When we want to cut materials with CO2 laser machines, we need to get the laser been close as we can to the material. Its here one of the big difference between these two technology’s,  the laser CNC have a gantry system inside that allow moves the laser head through stepper motors. Then the laser path across through 3 mirrors and 1 lens, and it’s the lens in the laser head the one that can give the capacity of cut materials because this one is close to the material.

The galvanometer CO2 Laser can’t cut thick materials

Because the laser head is far away to the material, this machine cannot cut must of the hard materials such as wood or acrylic. While a CNC laser has a head just 3 CM away to the material, the galvanometer head is 25 to a 50CM distance to the material.

What can it cut ?

Even if the galvanometer head has a significant distance with the material. This laser can cut very light materials, such as paper, paperboard, leather, denim, garments and other light materials. Check in the following link the materials it can cut and engrave.

With higher speed

One of the most significant differences is the speed. while the CNC CO2 laser machines use stepper motors to move the whole structure. And the laser head. The laser galvanometer head uses two small servo motors that run the mirrors inside the head, giving high accuracy and high speed at the time to engrave or cut.

High speed engraving and cutting      

Low speed engraving and cutting

The CO2 galvanometer head it can engrave 5 to 6 times faster than the fastest CNC laser Co2 machines. It gives the advantage of cut thing materials and mark materials at high speed

 

Great Marking Work By Laser Marking Machine-Wendy

/in , , , , /by

Great Marking work by Laser Marking Machine

Great marking work by laser marking machine.

We often use laser marking machine to print permanent codes on various products.

It is the economic system to determine the marking. And coding on the parts of the manufactured components.

Laser marking technique getting more and more popularity in the present printing field.

Due to its exclusive features and we can use it in different materials like metal, steel, rubber, plastic, leather, wood, glass and much more with low-cost marking.

The best part about this Fiber Laser Marking Machine is that it saves the labor as well as requires minimal maintenance.

1.Getting to know more details about the laser marking machine

There are different technologies of laser marking machine. Like Fiber, Green, Carbon dioxide (CO2), DPSS, etc.

The well-manufactured machines are popular for its performance, quality and of course zero maintenance among people.

The dependable manufacturer uses the original Engine Parts Laser Laser Marking Machine.

It mainly for manufacturing their machines to bring people the best quality.

They are well suitable for your environment as well as comfortable .

So as to automate that will surely help you to save money, energy and time.

The machine helps to print out permanent printing with Batch Lot No. and MRP.

The method provided by the machine provides benefits over the technologies.

It include marking quality, fewer consumables, and permanent printing.

Various technologies work with advanced procedures which are beneficial.

For example- The machine having CO2 marking machine in assorted outputs to point out a range of applications and substrates.

Laser markers have different touchscreen controller, different speeds, and clarity that are engineered to cut down the coding system.

This helps in minimizing both the cost and investment.

The fiber laser marker is best for metal and plastic marking.

The best part about these machines is that they can integrate into automations.

They help in picking, printing, placing, sticking and removing on automated linear.

These machines also consume very less power in comparison to others.

They are used for different fields with increased needs in precision, smoothness, and depth.

People can utilize fiber laser marking machine for engraving both metallic materials and the non-metallic.

The difference between the fiber and CO2 laser marking machine-Lucas

/in /by

The difference between the fiber and CO2 laser marking machine-Lucas

 

First, this is text mainly tell you the difference between the fiber and Co2 laser marking machine.For the difference between

the fiber and CO2 laser marking machine , the difference is mainly from the wavelength and laser source. This is a question

that mainly being asked by our clients.

The wavelength

Many clients, especially those new-challenger of this field, will always wonder the difference of the fiber and CO2 laser marking machine .  Actually, the biggest difference between fiber laser and CO2 laser marking machine is the wavelength. The fiber laser marking machine’s wavelength is 1064 nm. But the CO2 laser marking machine’s wavelength is 10.64 um.

This is why fiber laser marking machine could mark onto all metals and some plastics. But CO2 laser marking machine could

only work with non-metals.

The laser source

There is also another between the fiber and CO2 laser marking machine. The fiber laser marking machine use Raycus as its laser sourse. The CO2 laser machine use the Synrad as its laser source.

But all in all, these machines has the following after sale  service.

After sales Service

1. our service is available to each customer. And if any technical questions or problems, our engineers will help you .and give you solutions on the phone. or by face-to-face communication online.

2.Two-year warranty is provided.

3.Also the Professional staff for installation and training if needed.

4.And the spare parts are supplying on time. or doing some inventory if promising certain sales volume.

5.Faster delivery, we will support our sole agent to do the stock if good sales. then more convenient and helpful.

6.If the sales are good, we will arrange some famous exhibition fairs in the local or surroundings. and give our full support to our agents at the fair. We will provide our sample machines, catalog, DVD, manuals, etc. All native customers belong to our local agent. which is our basic rule. And we promise the final delivery is the same as displayed

If you want to see more videos of fiber and CO2 laser marking amchines, please  watch it  on Youtube:  https://www.youtube.com/c/KevinXTLASER.

You can also get more details by sending emails to xintian101@xtlaser.com. What’s app/Wechat/Line/Viber/Mobile: +86 15615583501.

Skype: lasermachine01