Příspěvky

How to clean the fiber laser cutting machine lens-Wendy

/in , , , /by

How to clean the fiber laser cutting machine lens

Clean the fiber laser cutting machine lens.

1. It is necessary to blow off the floating surface of the original surface with a blown balloon.

Especially a lens with tiny particles and flocs on the surface. But don’t use compressed air on the production line. Because this air will contain oil mist and water droplets, which will deepen the pollution of the lens.

2. The laser cutting machine lens is slightly cleaned by analyzing pure acetone. This grade of acetone is almost anhydrous, which reduces the likelihood of lens contamination.

The acetone on the cotton ball must be cleaned under illumination and circularly moved. Once the cotton swab is dirty, it must be replaced. Cleaning should be done at one time to avoid creating ribs.

If the laser cutter lens has two coated surfaces, such as lenses, each surface needs to be cleaned in this way. The first side needs to be placed on a layer of clean lens paper for protection.

3. If acetone does not remove all the dirt, then use acid vinegar to clean. When the vinegar is washed, it is used to dissolve the dirt to remove the dirt, but it will not cause damage to the optical lens. This type of sour vinegar can be experimental grade (diluted to 50% strength), or white vinegar containing 6% acetic acid for household use. The cleaning procedure is the same as for acetone cleaning, then the acid vinegar and the dry lens are removed with acetone. At this time, the cotton balls are frequently changed to completely absorb the acid and hydrate. Until cleaned.

4. When contaminants and lens damage cannot be removed by cleaning, especially due to metal splash and dirt, the only way to restore good performance is to replace the laser cutting machine lens.

More details,contact us.

Whatsapp:+8613176671529

Fiber laser marking on plastic seals-Wendy

/in , , , , /by

Fiber laser marking on plastic seals

Following is the introduction of fiber laser marking on plastic seals.

Now i would like to introduce you our newest model of laser engraving machine in 2019.

It equips with newest laser technology and advanced screen. It will extend the using life of laser machine.  And it will become easier to control.

Excellent beam quality

The optical fiber laser uses the medium mixed yb double-clad fiber with resonant cavity length.

So the beam quality is very good. And M2 value is 1.1. The output flare diameter can achieve 10 microns.

Excellent beam quality can ensure that optical fiber laser marking machine can get in a variety of material satisfying marking effects.

Meanwhile it is widely applied in most metal marking industries (such as brass, titanium, steel, iron, aluminum and so on)

and non metal materials like cloth, fabric, PVC, MDF, leather, acrylic, plastic and etc.

Laser long service life

Optical fiber laser marking machine use 1064 nm laser diode. So its average working hours can up to 100000 hours.

Small and exquisite Volume , applicable in the bad environment

Optical fiber surface area/volume ratio is high. And it is also good cooling effect. Meanwhile it does not need huge water cooling system and just simple air cooling.

So it can be running in bad conditions, such as high impact, high vibration, high temperature, dirt under the conditions of the normal operation.

Free maintenance operation

Optical fiber laser does not need for any maintenance (not including adjust or clean lens)

By the way, we are looking for partners and distributors of laser marking, cutting, welding and cleaning in global.

More details will be updated soon. Your bookmark will be the biggest encourage for me.

My email: xintian112@xtlaser.com  whatsup： 0086 13176671529

Non metal material laser marking machine-Wendy

/in , , , , /by

Non metal material laser marking machine

Following will introduce the non metal material laser marking machine.

Now i would like to introduce you our newest model of laser engraving machine in 2019.

advantages of fiber laser over other types

advantages of fiber laser over other types

It equips with newest laser technology and advanced screen. It will extend the using life of laser machine.  And it will become easier to control.

Excellent beam quality

The optical fiber laser uses the medium mixed yb double-clad fiber with resonant cavity length.

So the beam quality is very good. And M2 value is 1.1. The output flare diameter can achieve 10 microns.

Excellent beam quality can ensure that optical fiber laser marking machine can get in a variety of material satisfying marking effects.

Meanwhile it is widely applied in most metal marking industries (such as brass, titanium, steel, iron, aluminum and so on)

and non metal materials like cloth, fabric, PVC, MDF, leather, acrylic, plastic and etc.

Laser long service life

Optical fiber laser marking machine use 1064 nm laser diode. So its average working hours can up to 100000 hours.

Small and exquisite Volume , applicable in the bad environment

Optical fiber surface area/volume ratio is high. And it is also good cooling effect. Meanwhile it does not need huge water cooling system and just simple air cooling.

So it can be running in bad conditions, such as high impact, high vibration, high temperature, dirt under the conditions of the normal operation.

Free maintenance operation

Optical fiber laser does not need for any maintenance (not including adjust or clean lens)

By the way, we are looking for partners and distributors of laser marking, cutting, welding and cleaning in global.

More details will be updated soon. Your bookmark will be the biggest encourage for me.

My email: xintian112@xtlaser.com  whatsup： 0086 13176671529

co2 metal and nonmetal laser cutting machine-the nice option for advertisement industry-Max

/in /by

co2 metal and nonmetal laser cutting machine

Do you hear about co2 metal and nonmetal laser cutting machine?  And do you know well about how  it is working?

Nowadays acrylic and steel is the most popular material in the advertise industry. laser machines can do well performance according to it.

  1.  For acrylic, customers normally need engrave and cut. The best option is co2 laser engraving cutting machine.

There is different power(60w-300w) and working size(600*400mm-1500*3000mm) for meeting different requirements.

See below machine photo and working videos:

2. For steel, customers normally cut it into ideal patterns. So fiber laser cutting machine is best choice.

standard cutting size is 1500*3000mm with high speed, low consumable cost, perfect cutting performance.

 https://youtu.be/A0fqLos5kzs

 

3. If you have enough budget and factory space, the best way is to choose one co2 laser(around 4000-5000usd) and one fiber laser(40000usd-100000usd). However,  some of customers have no enough budget in short period.  They have to start the work. CO2 mixed laser cutting machine is the nice solution. It can cut 1-3mm metal and all nonmetal materials. Its performance is not the best, but the result can be accepted if no precise requirements are needed. There is 1200*900mm and 1300*2500mm size as standard type.

Check below photo of co2 nonmetal and metal mixed laser cutting machine:

1.5mm Stainless steel cutting:  https://youtu.be/5uO5Bzrs6zw

 

For more information, please contact me:

Email: xintian109@xtlaser.com

skype: xtlaser10

Mobil/whatsup:0086 18353156659

New Development Scope of Fiber laser Technology Machine in Future-Max

/in /by

New Development Scope of Fiber laser Technology Machine in Future

 

laser growth

From the market growth, according to the type of laser, the next five years, the market is the fastest growing direct semiconductor laser is mainly of high power semiconductor laser kilowatt level; the second fastest growing is the quantum cascade lasers, the lasers have obvious advantages, is widely used, especially play an important role in counter-terrorism, security and other applications in the future, the world of quantum cascade lasers will have a huge demand. Fiber lasers will maintain a steady growth rate.

 

 

laser growth

From the application of laser market, occupy about half of the country to remove the optical communication market, the macro material processing is the largest market, followed by the micro processing, with the future of manufacturing industry continued to develop high-end, micro processing market will have great development space.

 
In the laser micro processing market, the global laser micro processing market in 2016 is about 1 billion 100 million US dollars, and it is expected to grow to 1 billion 300 million US dollars in 2017. At present, the biggest application market is the semiconductor /PC board / display processing market, and the main service companies in this field are related companies. The following are the precision metal processing market, the nonmetal processing market and the additive manufacturing market.

 
The lasers used in laser micromachining are mainly excimer lasers, fiber lasers, CO2 lasers and solid-state lasers, among which fiber lasers and excimer lasers are the most widely used. It is worth mentioning that, CO2 laser did not die out from the market, in fact, recently in non-metallic processing also ushered in many new opportunities.

 
Another is the market of laser processing kilowatt high power laser processing market in 2016, the market size of about US $1 billion 500 million, the next five years will be relatively stable growth.

 
In the kilowatt class applications, the current metal cutting applications are still large head, accounting for about 70% of the share, and the other two types of applications are metal welding and additive manufacturing.

 
Although insiders predict metal welding Market in the future is expected to exceed the cutting market, but in the next five years, from the sales point of view, the fastest growing or metal cutting applications, is expected to 2022, in the metal cutting applications will reap $700 million KW fiber laser. At present, with the development of fiber laser, laser cutting machine has made a standard product.

 
Take a look at the global laser marking market. This is a relatively mature and stable market, the total income is about 600 million U.S. dollars, the future market growth is also relatively slow. At present, the laser used for marking is mainly fiber lasers (about half of the market) and CO2 lasers (about 1/3 market), and the application of semiconductor lasers is also increasing.

 

Contact: 

Email: xintian109@xtlaser.com

skype: xtlaser10

Mobil/whatsup:0086 18353156659

Thank you!

Best regards

What is CO2 laser and how does it work?–Clara

/in /by

Co2 laser application and more information

Recently, more and more clients are looking for Co2 laser marking and cutting machine. Co2 laser still takes a very important part in Industrial laser machinery, especially those who are doing marking and engraving service, DIY gift shops and business starter.

CO2 laser is one of the oldest gas lasers developed by Kumar Patel at Bell Labs in 1964, but there still are a large number of applications today.

Continuous-mode carbon dioxide lasers have great power and are easily accessible. They are also very effective for nearly all non-metal materials; the pumping power ratio (the excitation power) vs. output power reaches 20%. CO2 lasers emit in IR, their main wavelength range is between 9.4 and 10.6 μm (microns). Here is the simple picture of it, you can have a preliminary knowledge about how it works.

Given the high combined power at a reasonable cost, CO2 lasers are commonly used in industry for marking and cutting. Especially for some non-metal materials, such as leather, rubber, paper, acrylic, plywood, MDF etc. Here we would like to share some samples with you:

If you need more information about Co2 laser, please visit my Youtube: https://www.youtube.com/channel/UCpnX3PF6DCPKZS-NXRGOFKw?view_as=subscriber

And for price list, please send your inquiry to xintian115@xtlaser.com, or add my whatsapp: 008613335151833.