Příspěvky

XT LASER fiber laser cutting machine-Angelina

/in /by

What is the fiber laser cutting machine

Application industry:

 Fiber Laser Cutting Machine is applicable to machinery parts, electrics, sheet metal fabrication, electrical cabinet, kitchenware, elevator panel, hardware tools, metal enclosure, advertising sign letters, lighting lamps, metal crafts, decoration, jewelry, medical instruments, automotive parts and other metal cutting fields.

fiber laser cutting machine

Technical parameters:

Laser type Fiber laser
Laser brand IPG/SPI/Raycus
Laser power 1000W/2000W
Working area 1500X3000mm/2000X4000mm/2000X6000mm
Working table Pallet Changer /  Fixed Working Table
Control system PA8000
Drive mode Dual-drive rack and pinion transmission
Idle/Processing Speed 100m/min / 30m/min
Positioning Accuracy 0.04mm
Protection System Enclosure protection
Laser Head Precitec / Laser Mech / FS cut /Preste
Power Supply AC380V ± 5% 50 / 60Hz
Total Power 6KW~22KW
Cooling System Water cooling
Supported Format PLT, DXF, BMP, AI, DST, DWG, etc.


The advantages of fiber laser cutting machine

1) Excellent beam quality: smaller focused spot, more sophisticated cutting lines, higher work efficiency, better processing quality;

2) Higher cutting speed: It is 2 times than the same power CO2 laser cutting machine;

3) Higher stability: Adopt world’s top level IPG fiber laser generator, stable performance, the main parts lifetime is up to100,000 hours;

4) Higher electro-optical conversion efficiency: The efficiency of fiber laser cutting machine is three times than CO2 laser cutting machine, saving energy and environmental protection;

5) Low cost of electricity: The whole fiber cutting machine power consumption is just 20-30% of same power CO2 laser cutter;

6) Free-maintenance: It doesn’t need laser working gas, fiber transmission, without reflection lenses; it can save a lot of maintenance costs;

7) Easy operation: fiber transmission, no need to adjust the optical path;

8) Super flexible guide light: small size, compact structure, and it’s easy to satisfy flexible processing requirements.

XTC-F1530A laser cutting machine produced by XTLASER. It adopts gantry-motion structure, linear guide and screw drive, AC servo motor and drives, and exchange working table that keep high performance and cutting quality. Equipped with a world leading IPG-1000W/2000W fiber laser source. It is not only highly recommend for carbon steel cutting, but also excellent for SS plate, aluminum alloy plate and copper plate cutting.

 

Laser Machine – LASER World of PHOTONICS Munich – Alex

/in /by

Laser machine

We are taking part in LASER World of PHOTONICS Munich from 26~29th, Jun. Today is the second day and all laser machine have been sold. Our booth No is A2-549-6, welcome to visit us.

laser machine exhibition

As we know Germany is one leader of laser machine field. There is many very famous laser machine manufacturer and related laser product. Such as Trumpf, Rofin,DILAS, PRECITEC, HIGHYAG etc. All of these company is the leader in related field. Although most of them don’t produce whole laser machine directly, their accessory parts in laser fields is Irreplaceable.

Taking part in Munich exhibition is very important step for XT LASER. It will help XT LASER open new market in Germany, even whole Europe. Also this is why we take our laser machine go out.

laser machine

exhibition spot

LASER World of PHOTONICS Munich

LASER World of PHOTONICS has been held in Munich since 1973. It does a perfect job of combining technology with industrial application sectors for the widest variety of industries and uses. It is one of the most important fair in laser field.

Every two years, key players come to Munich to meet at the industry’s most important marketplace. The fair gives participants from more than 70 countries a complete overview of all topics that pertain to photonics on 55,000 square meters of exhibition space.

LASER World of PHOTONICS 2015 shed light on the industry. The enormous energy inherent in the topic was tangible at the leading trade fair in Munich: there were around nine per cent more exhibitors (1,227) and more than ten per cent more visitors (31.279) in attendance and a new hall was opened (55,000m² total space).

Besides the World of Photonics Congress, it is also included the fair’s two spin-off exhibitions:

This time we told take 3 sets sealed fiber laser marking machine and 1 set jewelry laser welding machine. We will take fiber laser cutting machine to Germany in Sep. If you are interested in it, pls let me know it.

Alex Wang

Email: xintian104@xtlaser.com

Mobile: 0086 18766152065

Skype: saint512406

Here comes the Laser World of Photonics in Munich, Germany, Let us witness together–Max

/in , /by

Laser World of Photonics in Munich, Germany

26th June, international application of laser, optoelectronic technology exposition is held as scheduled in New Munich Exhibition Center, Germany. the various photoelectric enterprises and buyers all over the world gathered into the event!
Xintian technology brings mini sealed laser marking machine, new designed sealed laser marking machine, jewelry laser welding machine attended this fair.

Our booth No. is A2 Hall 549-6.

Xintian technology salesmen and engineers on-site showed the customers professional laser processing skills, which wins customers‘ praise.

fiber-laser-marking-cutting-

fiber-laser-marking-cutting-machine

 

 

Now let us go to the exhibition spot.

And Booth is simple and spacious, filled with of science and technology atmosphere in the first new days!

And Xintian salesman introduce customers how to operate machine.

German-munich-exhibition-of-laser-marking-cutting-machine (3)

German-munich-exhibition-of-laser-marking-cutting-machine

German-munich-exhibition-of-laser-marking-cutting-machine
And First-line sales staff is introducing the suitable product to customers according to their different needs.

Foreign customers and Xintian salesman are taking photos together


Therefore, Foreign customers stopped in front of Xintian booth. some are listening to the introduction and some are watching the machine performance

My contact:

Email: xintian109@xtlaser.com

skype: xtlaser10

Mobil/whatsup:0086 18353156659

Metal fiber laser cutting machine how to correctly use it -Catherine

/in /by

The current metal fiber laser cutting machine is the latest international metal cutting machine equipment. Considering achieve automatic cutting, need to know such reason:

(1)The output of high energy density laser beam.

(2) The laser beam gathered in the processing of the workpiece surface.

(3) Instantly achieve materialization and gasification equipment.

Open Type Fiber Laser

For the previously use gas laser machine, metal fiber laser cutting machine has a clear cutting advantages. It also has now become a high-precision laser processing, laser radar systems and other areas of the important choice.

For the bevel cutting, tube cutting can achieve high-precision cutting, and cutting edge neat, smooth.  Metal fiber laser cutting machine is not only suitable for the cutting of metal sheet. At the same time metal fiber laser cutting machine in the supplies, efficiency and environmental protection. But also the world’s leading technology products. The correct useage is conducive to the equipment life and cutting effect has a very good help.

How to correctly use metal fiber laser cutting machine:

1. Keep the metal fiber laser cutting machine often clean the rails to ensure that the equipment should always wipe the normal rack, rails. To be regularly cleaned and lubricants. Lubricants to ensure that no debris. The same also need to clean the oil on the oil, so it is conducive to the machine in the process of moving. And can accurately cut to ensure that cut out the product quality improvement.

2. Once a week through the vacuum cleaner to suck the dust and debris in the machine, and all the electrical cabinet off dust.

3. Every six months to detect the optical fiber laser cutting machine track straightness and the machine perpendicularity. If found abnormal should be timely maintenance and debugging. Did not do this, it is possible to cut out the effect is not how good, the error will increase, affecting the quality of cutting. This is the top priority, must be done.
4. Maintain regular inspection of the fiber laser belt to ensure that the tension, exemption caused the staff to be injured. Or in the operation of a problem, there may be hurt people, serious can lead to death. Steel looks like a small thing, a problem is still a bit serious.

5. Double focal length laser cutting head is a laser cutting machine on the vulnerable items, long-term use, resulting in laser cutting head damage.

You can see some videos as follow:

Any questions please let us know. If you want to know more about metal fiber laser cutting machine. Contact with us now.

Catherine

Skype: xtlaser188

Email: xintian106@xtlaser.com

Whatsapp/wechat: 008615588821549

Metal pipe fiber laser cutting machine : Charry

/in /by

Metal pipe fiber laser cutting machine

All we know about the metal pipe fiber laser cutting machine is the machine frame,with the rotary disc to fixing the pipe.

But you must not know the difference between one stable pipe cutting rotary disc and one bad quality.

Let me show you the profession of our researching and developing department:

As one metal pipe fiber laser cutting machine,there are two parts of the pipe cutting.

The fixed chunk at the front of tube body and the moved chunk at the behind of the tube body.

The fixed chunk at the front of tube body:

Sealed chunk:
pipe laser cutting    pipe laser cutter

The moved chunk at the behind of the tube body:

pipe laser cutting chunk

We use the sealed chunk,some factories maybe use the open structure chunk,but the precision of the open type is just 0.5mm, our sealed chunk,can reach a higher precision–0.03mm,how big difference,you can image that if you choose one sealed chunk,your customers will be so satisfied with your work,so that you can have a good image to attract more customers,right? 

And most important is that you want to cut different kinds of pipes,round,square,rectangle pipe,the sealed one can fix all the kinds,the open one just for round pipe.

When you look for the pipe fiber laser cutting machine,pls remember to focus on the machine details.Not just price.

metal pipe fiber laser cutting machine samples:

One of our customers sent us their cutting samples by our machine,sharing with you;

pipe laser cutting

metal pipe fiber laser cutting machine samples

 

 

 

 

 

 

 

Some of our customers have ever operated this kind machine,maybe you are worried about the machine operation,installation.

just like us,when we buy something from foreign supplier,also worry about that,but as a machine factory,the after-sales department will support you when you need help.

Following with one metal pipe fiber laser cutting machine operation video:

According to our experience,most customers will cut pipe and plate at the same time, but as the combined machine,there still with some defects,so if you only cut pipe,most customers will choose the professional pipe cutting machine,not the combined machine.

More details we can contact by email:

xintian111@xtlaser.com

Whatsapp:+8618253165863

Focus-Point-is-Easy-to-Find-on-Fiber-Laser-Marker-Jennifer

/in /by

Many of our clients, who contacts with fiber-laser-marking-machine, will consider about the problem of adjusting the focus point.

In fiber-laser-metal-marking process, the traditional way to adjust the focus point, is to use the handheld wheel. Currently, in order to make more convenient for the operation of metal marker, the outside red indicator is the good helper for metal-engraving-machine.

As you may know that in the metal-printing-machine, there is one inside red indicator inside of the whole metal printer, now one outside red indicator is installed on the mini & desktop fiber laser marker. During the metal engraving process, when these two red points meet together into one point, so here is the strongest laser light, so here is the focus point.

You can see the following pictures directly:

Our machines have been sent to many places in the global world. Especially for the clients, who used the marker firstly, they can also operate the jewelry laser engraving machine easily by following the videos and user manuals we sent.

 

 

 

 

 

 

Our Fiber Marking Machine has an amazing performance for the cost. It is widely used on metals and non-metals, and it can engrave both letters and high-quality images onto your products with speed (7,000mm/s) and accuracy (0.001mm).

Hoping the above can be helpful for u.

Any question, free to leave message here.

Contact person: Jennifer Sun
Email address: lasermachine01@xtlaser.com
Whatsapp & Wechat: 0086 15169105376
Skype: xtlaser01@gmail.com

Metal Plate Knowledge – Fiber Laser Cutting Machine

/in /by

Fiber Laser Cutting Machine

With the development of laser technology, fiber laser cutting machine become more and more popular on sheet metal cutting fields.

fiber laser cutting machine workshop

workshop

Several years ago, YAG laser cutting machine and CO2 laser cutting machine have occupy a large market. Recent years fiber laser cutting machine is instead YAG & Co2 laser cutting machine and other traditional cutting solution, such as EDM, Plasma cutting, water jet cutting and Wire EDM.

In thin sheet cutting field, most user have instead of these traditional cutting solution with fiber laser cutting machine. But what is sheet, what is plate, what is cut deal? Do you know how to distinguish so many different metal plate?

Mild steel plate as a sample

  • Sheet

Thickness:≤4mm

Sheet means metal plate less than 4mm, usually we call it thin plate. Mild steel and Stainless steel as two main cutting material, most company select laser cutting machine on this field.

750W fiber laser cutting machine is popular in this field.

  • Medium Plate

Thickness: 4mm~20mm

Also we call it middle plate, 1kw & 2kw laser machine is popular in this field.

If plate thickness under 10mm, 1kw fiber laser cutting machine is suitable.

if plate thickness from 10~20mm. 2kw machine is suitable.

  • Heavy Plate

Thickness: 20~60mm
Usually we call it thick plate, it need 3kw laser machine at least.

Fiber laser cutting machine is not very popular in this field.

  • Extra thick plate

Thickness: 60~600mm. some country could reach to 700mm

No fiber laser cutting machine could used in this field.

 

On thick plate cutting fields, co2 laser cutting machine and plasma cutting machine have big advantage than fiber laser. These kind of machine have very good complementary relationship. Some large metal plate processing center have all these machine in order to meet different cutting demand.

 

If you want to learn more on laser machine filed, Contact me follows

Alex Wang

Email: xintian104@xtlaser.com

Mobile: 0086 18766152065

FAQS about fiber laser cutting machine — Doris

/in /by

FAQS about fiber laser cutting machine

Fiber laser cutting machine now widely used in metal processing, which is the new trend and future in metal cutting field.

As first time purchasing, customers may have many question, below some answers hope can help you!

1.What is laser cutting?

RE: Light amplification by stimulated emission of radiation. Basically, this entails firing a laser beam at material to melt, cut, or vaporize it to form the required shape.

2.How accurate is laser cutting?
RE: Machine suppliers quote plus or minus 0.1mm, though the reality is that this can vary significantly without constant servicing and maintenance. XTLASER can work to tighter tolerances if requested, but this takes time to adjust machine parameters. Additionally, a laser cut on thicker materials can be difficult to measure accurately due to gas striations.
3.What materials can you cut?
RE: Materials currently include mild steel (0.5-25mm), stainless steel (0.5-20mm) and aluminium (0.5mm to 15mm) in most forms. As well as brass, copper, galvanized sheet, silver and gold. But the industry is changing with the advent of fibre laser technology.
4. What drawing files can you accept?
RE: DXF, DWG, IGES, STEP and NC files are the most common and easily transferrable into most CAD/CAM systems.
5. What’s the smallest hole you can laser cut?
RE: The traditional rule was that the thickness of material was equal to the smallest diameter hole. But this has changed with the advent of advanced piercing techniques and further still with the on-going development of fiber laser technology.
6. Why should I laser cut?
RE: It is probably the most cost-effective and fastest way of producing a clean and accurate profile.
7.How thick is a laser beam?
RE: This can vary dependent on optic cleanliness, but the optimum C02 laser beam is 0.2mm. Again, this has changed with fibre lasers, as this is a more controllable beam delivery system and is closer to 0.1mm.

If you need more info, feel free to contact me:

Attn:       Doris Xing 
Email:      xintian103@xtlaser.com
Skype:        xtlaser103
Whatsapp:      008615990992073
 
Youtube Channel:  https://www.youtube.com/channel/UCzLMdocfV8K3yJdFds2PkgA

Maintenance essentials of Laser cutting machine –Metal Powder Dust

/in , /by

Maintenance skills of Laser cutting machine

As dust made by metal laser cutting machine is mainly the metal powder,

which will surely have bad influence on people health, especially breathing system.

Metal-Powder-fiber-laser-cutting-machine

Metal-Powder-fiber-laser-cutting-machine

so for sake of your health, please follow up below when you operate laser cutting machine:

  1. Keep away from cutting place when laser cutting machine is working. if can not, wear the necessary mask.
  2. Install the full cover to laser cutting machine for avoiding breathing metal powder.
  3. Use the suitable exhaust fan for this laser cutting machine to absorb or transfer it outside.

Besides protect yourself, it is also recommended to regularly clean up the electrical cabinet of laser cutting machine and check the working conditions of the cooling fan. laser head is the one of core part. Dust can get into it through nozzle. so check whether there is dust inside every time when start the laser cutting machine.

 

For more details, please contact me:

Contact person: Max

Email: xintian109@xtlaser.com

skype: xtlaser10

Mobil/whatsup:0086 18353156659

 

Fiber Laser Cutting Machine in the Kitchenware Industry Application

/in /by

„XT laser FIBER LASER CUTTING MACHINE“ for the kitchenware market successfully developed a series of products with independent intellectual property rights, the solid laser cutting machine, fiber laser cutting machine series, high-precision small-format laser cutting machine, etc., for the majority of kitchenware manufacturers choice and application .

Kitchenware processing industry, a large number of products such as range hoods and gas appliance use sheet metal panel, using traditional processing methods mold consumption, efficiency and low cost; restricted product upgrading, technological improvement and innovation. The background environment in today’s scientific and technological innovation, industrial restructuring, market competition is fiercer than ever before, who can find the first breakthrough in the production process, including equipment updates, kitchenware terms of processing enterprises, there is no doubt it is very important to have a realistic and long-term significance. China and Russia laser production line kitchenware processing enterprises needs of small and medium-power laser cutting machine is the best solution to solve the above problems. Its practical and ingenious mechanical design, the superior performance of the optical system, powerful control system. Under the sheet metal of a single piece of material with good beam quality, high precision, small slotted, saving materials, the cutting surface is smooth and safe operation, such as a series of characteristics can be faster and better way to complete any graphic material to reduce the number of skilled workers to eliminate the pressure of rising labor costs, work efficiency is greatly improved, and monthly can save tens of thousands of dollars for outsourcing fee, and within a year will be able to recover the investment cost of the laser cutting machine. Laser cutting machine can not only solve the kitchenware manufacturer has been plagued by many problems, and convenient sample processing on the panel to reduce the cost of new product development, shorten the development cycle of new products. Meanwhile, the laser machining apparatus when the cut material Narrow very high degree, improve the yield of the hoods and the gas appliance, reducing material loss. For some profiled molding products, laser cutting machine has a unique advantage.

Developed by XT laser 500W fiber optic laser machine 1000W metal laser cutting machine, the choice of today’s most sophisticated Germany IPG lasers or the Russian core laser technology laser cavity and devices in the sheet metal processing industry has been widely used, and has accumulated rich experience in industrial applications and brand awareness, „China and Russia laser has become the field of sheet metal processing the best cost-effective laser cutting equipment and the most authoritative sheet metal processing solutions

Contact Person: Alex Wang

Email: xintian104@xtlaser.com

Mobile: 0086 18766152065