Příspěvky

What is fiber laser cutting machine:Charry

/in , /by

What is fiber laser cutting machine

What is fiber laser cutting machine.

Firstly,The Laser Principle

This is the same principle that applies in laser cutting: high-intensity light (focused sun’s rays and welding torch flame) melting almost anything on its path. Laser, as we know it, is an acronym for “light amplification by stimulated emission of radiation.”  There are the application of the fiber laser cutting machine:

• Laser cutting and welding
• printing
• pointers for trainers and speakers
• Barcode scanning
• Surgery
• Law enforcement
• Engraving
• Measuring
• Entertainment
Laser cutting has many uses, covering both industrial and non-commercial applications. By its particular characteristic, where a high-intensity light beam is consistently.The cutting process not only of hard objects like steel is amazingly with utmost precision. We know that it is laser-cut if it is more than razor-sharp.

Secondly,Fiber laser cutting works

The machine that for cutting is laser cutter. Using a beam of light coming from a laser resonator, the beam in different directions through mirrors or benders, each time enhancing its intensity before it is trained and focused towards the metal plate to be cut. This beam is actually a column of high-intensity single wavelength light. As it travels through the cutter’s nozzle, the beam is focusing into a fine line using a focusing lens before reaching the end of the nozzle tip where it hits the metal plate.

In this state, the beam hitting the material has such an extreme heat density as to result in rapid heating, melting and vaporising of the material. Due to the fine line of the laser beam and the high intensity of the heat, those actions seem to be happening simultaneously. Any molten material that remains is usually blown away using high-pressure nitrogen.

The more introduction will be in next blog.

Anymore you want to know,contact us:

Email: xintian111@xtlaser.com

Whatsapp:+8618253165863

Skype: Charry XTLASER Zhu

How To Maintain Fiber Laser Cutting Machine?-Anne

/in , /by

How To Maintain Fiber Laser Cutting Machine?

The price of laser cutting machines is usually very expensive, ranging from hundreds of thousands to millions. Therefore, it will expand laser machine lifetime as soon as possible.So as to better save production costs and win greater profits. Laser cutting machines are very important for routine maintenance and maintenance. The stable operation of the machine is inseparable from normal operation and routine maintenance.

The daily maintenance of the laser cutting machine is as fallows:

Water replacement and tank cleaning

Make sure filling the laser tube with circulating water before the machine starts working. The quality and temperature of the circulating water directly affect the service life of the laser tube.

If Cleaning the water tank:

First, turn off the power and unplug the water inlet pipe. the water in the laser tube automatically flows into the water tank. Next, open the water tank, remove the water pump, and remove the dirt from the water pump. Third, clean the water tank, replace the circulating water, return the water pump to the water tank, insert the water pipe connected to the water pump into the water inlet, and clean the joint. Finally, place the pump separately and run for 2-3 minutes (fill the laser tube with circulating water).

IF In the previous machine description.it says that there are three mirrors and a focusing lens on the laser engraving machine.

The first reflector locate at the exit of the laser tube, the upper left corner of the machine. And the second mirror is located at the left end of the beam, No. 3 The mirror is located at the top of the fixed portion of the laser head. And the focusing mirror is located within the adjustable barrel at the lower portion of the laser head.

These lenses reflect the laser, focusing and emitting from the laser head. The dust or other contaminants contaminated the lens easily , causing laser loss or lens damage. Do not remove the 1st and 2nd lenses when cleaning. Instead, carefully wipe the lens with a cleaning solution along the center of the lens. Wipe the edges and wipe. The lens No. 3 and the focus lens have to remove from the frame and wiped in the same way.

Hope this information is helpful for you.

If you have any questions of machine,welcome to contact us.

Sales Manager:Anne Zhang

Mob/whatsapp:+8615098735595   Skype:amyzhang1321   Email:xintian121@xtlaser.com

How To Deal With Reflective Metals With Fiber Laser Cutting Machine?–Anne

/in , /by

How To Deal With Reflective Metals With Fiber Laser Cutting Machine

Do you have confused when you choose a fiber laser cutting machine?

What are reflective metals?

“Highly reflective metal” is a common word that almost all metal processing practitioners know. But what it means in essence? To figure out what is reflective metals, firstly it is important to know the constituents of metals. Take Aluminum and Silver as examples, they are highly reflective and can reflects 95% visible light.

Laser cut and marked aluminum and silver products are widely use in windows, jewelry, solar mirrors, decorative materials. Other reflective metals like gold, bronze, copper and brass are also hard to laser cut using fiber lasers. Mirror Polish Stainless Steel also need to  consider reflective metal .fiber laser sources must  process all these reflective metals.

How to cut reflective metals?

Laser processing on reflective metals needs special fiber laser sources. As the reflected beam will damage the laser machines, nLIGHT fiber laser source is adopted by XT LASER fiber laser metal cutters to cut reflective metals. if

As these lasers do not use mirrors and delicate lenses, the reflection from metals like copper, aluminum and brass do not damage the cutting equipment. So Fiber laser technology is the best way to cut reflective metals.

Advantages of XT LASER fiber laser cutter for reflective metal sheets:

Stable processing of polished stainless steel, aluminum, brass, and copper: nLIGHT fiber lasers are especially configured on our fiber laser cutting machine specializing in cutting high reflective sheet metals.

This fiber laser source incorporates a proprietary back-reflection isolator that protects all modules from back-reflections generated by the workpiece. The whole cutting process is safe and stable, without any damage to the laser source.

  • SO Highest uptime with the lowest cost of ownership: our fiber laser metal cutting machine design enables end users to manage maintenance and service regularly, which results in higher machine uptime, lower cost of ownership, and a greatly improved customer experience.
  • IF Improved cutting performance: our fiber laser metal cutting machines are designed for precision metal parts manufacturing industries. Featured with faster processing of fine features, and better processing quality through minimal heat affected zone, that why most of customers like them.

Now that you know how to deal with reflective metals, you can take up this task with ease.

If there is any problem during your manufacturing process, please contact us or leave your message below.

We will give quick response and professional laser solution to your questions!

If you have any questions of machine,welcome to contact us.

Sales Manager:Anne Zhang

Mob/whatsapp:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

Service and quality,what is important for you:Charry

/in , /by

Service and quality,what is important for you

Service and quality,what is important for you.

Service and quality,what is important for you

Actually,as a buyer,all of us is the same.We need to think what we should focus on,and what is better for us,what is suitable for us.

I am a directly girl,i like shopping very much,every day i spent money on goods,cloth,shoes,skin care products,phone,computer,etc.

And now,i am planning to buy one car,i am thinking about the quality and service,also price.

So when you buy fiber laser cutting machine,also the same.

Firstly,you buy one machine is to do your work,to improve the working efficiency,to save time,to save cost.Right?

So the quality is the first factor.How to check the quality?

1.To check their website,if the website shows many other machines,like CO2 machine,like bending machine,like shearing machine,CNC machine.

That means they didn’t start fiber laser machine from the company beginning,or means they produce other machines,but take fiber laser machine from other manufacturer.If not from the beginning to make fiber laser machine,then the profession need to be considered.And in China market,there are so many suppliers have fiber laser machines,but many suppliers just want to earn money from this market,from you.Then you can pass these suppliers.

2.To check they are trading company or not.

Also can get the result from the website,for trading company,their machine pictures will be the same as some manufacturers,just different logos.Or just have machine pictures,no other details,no videos,no technical parameters,or no real factory picture,etc.

Why it is not good to buy from trading company? Cause they are not the manufacturer,then they can not provide you the correct cutting parameters even the correct solution,even no engineers training in your factory,so how do you use the machine?Just put the machine in factory?

And when you have machine questions,you contact them,then they need to contact manufacturer,and get feedback,then tell you how to solve it.

Time is wasting~~~

Next blog,will share something about service with you.Hope it will help you.

Whatsapp:+8618253165863

Email:xintian111@xtlaser.com

Furniture fiber laser cutting:Charry

/in , /by

Furniture fiber laser cutting

Furniture fiber laser cutting.

Stainless steel is widely in the industry and in the kitchen.
Such as gas stoves in the kitchen, microwave ovens, gas stove electronic parts, kitchen hardware and so on.
Common stainless steel cutting methods include high-pressure water jet waterjet water cutting, stepping punching, file cutting, disc cutting, grinding wheel cutting, laser cutting and so on.
Among them, stainless steel thin plate laser cutting machine occupies a large proportion in industrial production, and stainless steel cabinets use 1-2mm stainless steel thin plate.
In the processing of sheet metal, the advantages of laser cutting machine are obvious. The laser beam has a short transposition time and is easy to complete continuous processing. The use of laser cutting not only speeds up processing, high efficiency, but also can complete the cutting of any shape of the board. It don’t need to change the mold or tools, shortening the preparation time period. Therefore, the laser cutting machine can effectively reduce the processing cost of stainless steel cabinets. It also help enterprises to occupy the market with more cost-effective products.

In terms of aesthetics, the laser beam of the laser cutting machine is in a small area. Because the energy is very concentrate, only a small amount of heat go to other parts of the steel. And the deformation is small or no deformation, so the processing precision is high, and the section is high. Smooth, stress-free deformation, the processed stainless steel sheet has a higher „face value“.

The advantages of fiber laser cutting machine.

Lower maintenance costs: The equipment is manufactured by the core light source, and the maintenance and repair costs and procurement costs are reduced by 20%.

Higher cost performance: The equipment uses a high-quality cutting process library, which has the same cutting efficiency and cutting quality as imported lasers.

Faster cutting speed: cutting speeds as fast as 50m/min and acceleration of 1.2G.

So if you need the fiber laser cutting machine,contact us.

Email:xintian111@xtlaser.com

Whatsapp:+8618253165863

Nesting software for fiber laser cutting machine:Charry

/in , /by

Nesting software for fiber laser cutting machine

Nesting software for fiber laser cutting machine.

As we all know, in the machinery manufacturing industry, material utilization has a natural enemy – surplus material. This is something that all manufacturers are hating.

Why, because the surplus material is not good for reuse, it has to pay a lot of management fees when it stay in the warehouse. Some company’s cutting group has accumulated more than tens of tons of surplus materials, and the backlog of raw materials directly leads to difficulties in the company’s capital turnover. There are more surplus materials, and the material utilization rate is definitely low, which will definitely lower the company’s product cost and lower the profit rate.

There are many reasons for the residual materials. The main reasons include:

1the unreasonable purchase of sheet, which leads to the failure of the parts and the remaining side.

2 The machine operator has insufficient budgeting capacity for the steel plate, and the improper arrangement causes the steel plate to remain.

3 The accumulated margin material is not clean for a long time and stay underneath. Once we need to cut the small steel plate,can not find small steel plate. It can only be cut from the large steel plate, thus forming the margin material. Also, the more the surplus material. Waste a lot of resources in the enterprise.

So the Cypnest software will help customers to do this work.

Can save the materials,cost,time,also can calculate the quantity,weight,etc.

If you also need the machine with nesting function,contact us.

Whatsapp:+8618253165863

Email:xintian111@xtlaser.com

Fiber laser cutting machine aging solution:Charry

/in , /by

Fiber laser cutting machine aging solution

Fiber laser cutting machine aging solution.

Problems with the laser itself.

Fiber laser cutting machines require regular maintenance and maintenance of the external light path of the laser generator. In fact, after the laser of the laser cutting machine is working for a period of time, the power drop is inevitable.

When the power drops to affect production,need to maintain the laser and the external light path. When complete the maintenance, the cutting ability will return to the factory level.

We should clean each guide rail should frequently to remove dust and other debris to ensure the normal operation of the fiber laser cutting machine.

We should clean the lubrication system frequently, and clean the motor and lubrication frequently. The machine can move better during the journey, and improve the quality of the cut products .

If the quality of compressed air (mainly oil filtration, dryness, dust).

Dust and smoke are produced at the production site, and some users put the painting work near the fiber laser cutting machine, which will affect the cutting quality and cutting ability of the fiber laser cutting machine.

When we get the machine,we need also use it carefully.

Promise to learn the operation from our engineer,promise you will follow the right steps.

Hope fiber laser cutting machine will help us.

Contact: Whatsapp;+8618253165863

Email:xintian111@xtlaser.com

How To Choose Fiber Laser Cutting Machine-Anne

/in , /by

How To Choose Fiber Laser Cutting Machine

For most of customer,they don’t  know how to choose a suitable machine for their work.XT laser will share some information of machine:

In the fiber laser cutting machine market,you have known that most suppliers use the same main configurations,especially for the laser source,the cutting software,the laser cutting head.

So after the main configurations,you should know the specific machine parts.

Cause the other machine parts also will have a big influence on the machine cutting stability ,cutting precision,cutting speed.

So what parts you should notice?

1.The servo motor:

the brand name,the power,the servo motor power need to stand the machine moving with a higher moving speed.

2.Then,the water chiller:

Thats also the brand name,the chilling ability.Cause the water chiller is to chill the laser source,the laser cutting head.

Thats really important,if the laser source and laser cutting head are broken down,how does the machine do your work?

You will waste many times to change new head or laser source. For that time,you lost your customers and your business,and your money.

3.Finally,the machine body:

It is also important.Cause the machine body is to stand the cutting materials,its stability depends on its frame and weight.

Usually,many CO2 laser cutting machine suppliers entered into our fiber laser cutting field.Some of them still use the CO2 lathe bed to build the fiber laser cutting machine.

One thing you need to know is the weight of co2 lathe bed just half of the professional fiber lathe bed,not stable.

And besides,some suppliers use the square tube welding lathe bed,thats okay for the smaller laser power,like 500w ,750w.

When you need the higher laser power,the square tube welding body is not good.Cause higher laser power will cut much thicker materials,the machine body weight can not stand a such weight.

When you cutting,the machine body will have a stronger shake,there is no any precision.

So these information is very important for whole machine,customer need to make these clearly when choose a machine.

Hope these information is helpful for you.If you have any questions,please contact us.

Sales manager:Anne Zhang

Mob/whatsapp:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

 Welcome to visit XT LASER factory.

Cypcut layers fiber laser cutting machine:Charry

/in , /by

Cypcut layers fiber laser cutting machine

Cypcut layers fiber laser cutting machine.

There is one customer want to know about the different layers in the Cypcut software,hope it will also help you to know the machine.

1.As you show, there are 3 size holes, so we should set 3 different speed, am I right? Because if you use the highest speed for small holes, it effect the quality, am I right?

Imagine we have 3 different size and related to speeds 1000mm/min 2000mm/min and 3000 mm/min, what will happen if I use 3000mm/min for all of holes? Does it damage the smallest hole? If you want to use only one speed , which speed is proper for all holes?

In European machines, I know we use 3 different speed because this way we have the highest efficiency, but with cypcut it takes a lot of time to select each geometry to apply the layer.

Yes,you are right,you just need to set different parameters in different layers,speed,power,height,etc…
And for parameters, it also need depends on the material and thickness.
Engineers said if you just need to cut different sizes circle,then any speed you use,is no problem,will not affect the circle quality.
Why use the different layers?
Engineers said when you want to cut circle, square, pentagram in one sheet,the square corner or the pentagram corner is easy to burned,need some special parameters,then we can use the different layers

2.Please ask your engineers, if we have only circles and  we use the same speed , is it the Maximum speed? Because on small holes it may effect the Quality.
Yes.
3.And is it depends on the laser power? I mean in 2kw machine speed and power is a lot for a small hole, how do you control it?
Yes.Of course.
You use 2000w to cut 1mm stainless steel,and use 500w to cut 1mm stainless steel,the speed is different.
The power decide the speed.
And we need to know the machine has the accelerate speed,even we set the cutting speed is 2000m/min,but when the circle is really small,the speed from 0 to 2000m/min, it need time.
when we cut the small holes, it can not reach the fastest speed.
4.And about square corners, how do you set, can you show me?
It also depends on cutting files,thickness,materials,powers.
It is better to show you and teach you when you come to our factory.
5.And can cypcut use power ramping? When reach to corner, automatically changing the power?
Yes, in the cypcut, it has the power curve,it will change the power automatically.
If you want to know more about fiber laser cutting machine,contact us.
Whatsapp:+8618253165863

Focus on fiber laser cutting machine details;Charry

/in , /by

Focus on fiber laser cutting machine details

Focus on fiber laser cutting machine details.

Focus on fiber laser cutting machine details

Firstly,- how much weight of body?  2.6 tons

Secondly,- how much weight of total of machine?  except for water chiller and laser source, total weight is 5 tons

Thirdly,- which model and power of servo motors are used?
Servo motor: YASKAWA, Japan
2 Y axis 1300w
1 X axis 850w
1 Z axis 400w

Fourthly,- which model and version of cypcut do you use?
FSCUT 2000

Fifthly,- which model of chiller and cutting head do you use?

Price is not including water chiller, if you buy our water chiller, it is XTLASER brand,professional for fiber laser cutting machines.
Maybe others use S&A or Doluyo , which is for co2 laser , not fiber laser.

Sixthly,Can AdLink PC work in local network of company?
Yes, it can be connected with local net work.

Seventhly,What files formats use adlink/CypCut for cutting?
DXF or PLT file, same as Ezcad software.

Finally,cutting machines equipped with a system for recognizing the curvature of the sheet?

yes, there is capacitor on laser head, which can detect it  and laser head has follow-up system.

If you are a new for fiber laser cutting machine,do not worry,XTLASER will help you to know more.

If you are the agent of fiber laser cutting machine,then we can have a better market on our mutual effort.

And if you are familiar with the fiber laser cutting machine,then you know about our machine is professional than other same levels.

We always make the Amada,Trumph as our final goal,hope we can use the fiber laser cutting machine to move the development of the world.

More questions about the fiber laser cutter,contact us.

Email:xintian111@xtlaser.com

Whatsapp:+8618253165863