After sales service of fiber laser cutting machine:Charry

After sales service of fiber laser cutting machine

After sales service of fiber laser cutting machine.

When customers get the fiber laser cutting machine,they are worrying about the operation.

Except the steps of operation,Also need to know the environment.To make sure the machine is in a suitable condition.

Environmental conditions

Firstly,The temperature range at the workplace must between 15-35 degrees C. Thesystem components must not expose to direct sunlight.

Secondly,In the case of tropical climatic conditions or if the temperature of the workplace rises above 35 degrees C, it is recommend that the equipment should be house within an air-conditioned space/room.

Thirdly,The Dew Point conditioning of the ambient air should be less than 10 degrees Cin order to prevent condensation in the refrigerated parts of the machine.

Fourthly,It is recommend that the machine should install on a vibration-free floor.

Fifthly,Vapours resulting from paint or solvent injection can absorb by the laser beam and can adversely affect the functioning of the system. For this reason, contact with the laser beam by such vapours may constitute a high risk of explosion.

3year warranty
In the warranty period,if it breaks down or some parts damaged (Except the human factors and the factors of force majeure), the seller should be responsible for repair for free, the parts need to be replace will be provided from seller for free(Except the quick-wear part or Consumables).
Customer service will be feedback within 12 hours.
We provide machine lifetime maintenance services though warranty expires.
Offered a wide range of hardware and software support after the warranty expires, enjoy free upgrades.

More details you want to know,contact us:

Whatsapp:+8618253165863

Fiber laser cutting machine common fault part2:Charry

Fiber laser cutting machine common fault part2

Fiber laser cutting machine common fault part2.

Firstly,cutting / engraving depth is not ideal.

1.Whether the cutting/engraving processing parameters are normal. Set the appropriate processing parameters.

2.Is the laser power setting normal: Set the laser power correctly.

3.Laser output is weak: see point 2.

Secondly,the computer and equipment are not online

1.Whether the scan switch is turn on: Turn on the scan switch.

2.Is the motion system energize: Check the motion system for power and make it normal.

3.Is the DSP motion control card damage: So replace the DSP motion control card.

4.Is the signal cable loose: Reinsert the signal cable plug and secure it.

Thirdly,the processing size has errors or malfunctions

1.Is the whole machine and computer ground properly: Ground the device and computer well.

2.Is the signal line normal: Replace the signal line.

3.Computer operating system failure or virus infection: Reinstall the operating system or antivirus.

4.Is the computer running properly: So replace or dispose of the computer.

5.The power supply is unstable or has an interference signal: install a voltage regulator or eliminate interference signals.

6.Whether the application software is normal: Reinstall the driver software for the software and motion control card.

7.Whether the processing parameters are set correctly (such as layout, etc.): reset the corresponding parameters

8.Whether the machining program is normally: Check the machining program and modify it until it is normal.

Finally,if you need a fiber laser cutter.Contact us.

Email:xintian111@xtlaser.com

Whatsapp:+8618253165863

What affect the cutting quality?-Charry

2018-08-27/in Fiber Laser Cutting Machine, Industry news /by Admin

What affect the cutting quality?

When the position of the laser focus is not correct, the cutting end face is not easy to be smooth, and the slag is bad.

Simply speaking, the focus position is not suitable for the amount of focus.The internal pressure of the slit is low,so that the molten metal cannot be effectively blown off and there is slag.

When the above occurs, we should test and adjust the focus.The up and down position of the focus is closely relate to the material properties and thickness of the material.

The cutting nozzle is the most end component of the laser head.The shape of the nozzle and the characteristics are one of the key factors affecting the quality and efficiency of laser cutting.

Taking carbon steel as an example.When using oxygen as an auxiliary gas, the gas flow into the slit is large and the speed is high. In this case, the slit material can fully oxidize and react. At the same time, sufficient momentum will melt.Then the cutting quality will be good.

If there is a phenomenon such as unevenness of the end face and burrs on one side of the edge during the cutting process.

there are the following possibilities.

1. The optical lens has burns and stains. Replace the protective lens.If still not good,then it is necessary to check focusing lens is burnt or not.
2. The auxiliary gas is not concentrate, mainly due to problems with the composite nozzle.
3. If there is a side of the dross that is the edge of the knife or the end, it is necessary to check the problems of the cutting motion control.

When you are a new to the fiber laser cutting machine,you will think there are all problems.

But just like a mobile phone,you need to play it agin and again.then you will find the interest.

If you need the fiber laser cutting machine,contact us.

Email:xintian111@xtlaser.com

Whatsapp:+8618253165863

How to start up fiber laser cutting machine-Anne

2018-07-12/in Company News, Fiber Laser Cutting Machine /by Admin

How to start up fiber laser cutting machine

When we use fiber laser cutter to cut metal, start up machine properly not only can prolong machine life, but also help us to avoid many unnecessary troubles such as short circuit, burn out machine parts, etc. Today we,XT LASER,will introduce you the correct start sequence of fiber laser cutting machine.

fiber laser cutter

so 1.Turn on main mechanical switch.

but2.Turn on water chiller, air compressor and dryer power switch.s

so 3.Turn on the machine power supply.

4.Open fiber laser generator power supply.

5.Turn on high pressure start switch.

so 6.Turn the fiber laser generator start switch to on.

o 7.Turn on 24 volt control power switch.

s 8.Turn on the electronic shutter switch.

so 9.Rotate the „Power adjustment“ knob clockwise to a suitable value.

so 10.Turn on the laser working gas such as CO2, N2, auxiliary gas O2, etc.

These are the correct boot order. Correct operation steps can prolong the life of fiber laser cutter. If you want to know more about our machine, welcome to contact us.

Sales Manager

Anne Zhang

Mob/whatsapp:+86 15098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

Welcome to visit XT LASER.

Why is Fiber laser cutting machine better than CO2 and YAG?-Anne

2018-03-26/in Industry news /by Admin

Why is Fiber laser cutting machine better than CO2 and YAG?

The reason why the fiber laser cutting machine can quickly occupy the market and gradually replace the traditional cutting process, is that it has many obvious strengths.

So why is it better? Let’s make a comparison among fiber, CO2 and YAG laser cutting machine.

Ⅰ、Fiber laser cutting machine VS CO2 laser cutting machine

1.process

On one hand, CO2 laser cutting machine has a wide range of cutting,which can cut thick metal sheet and high reflective material like aluminum plate.

For non-metallic materials like acrylic, wooden materials, PVC materials etc, the cutting thickness could be up to 60 mm. Because of the continuous laser, cutting surface is smooth and of high quality.

On the other hand, the cutting seam of CO2 laser cutting machine is thin, but the speed of cutting thick sheet is very slow.

What’s more, for thin sheet processing, fiber laser of equal power with smooth cutting section cuts 2-3 times faster than CO2 laser. The beam of CO2 laser is divergent and not suitable for large machining

2.cost

The maintenance cost of CO2 laser cutting machine is very high, not only front lens and back lens are expensive,but also the working life of turbine bearings is shorter than one year and ￥80000/pair for new.

At the same time CO2 laser cutting machine would consume gas during processing, and the photoelectric conversion rate is only 8% to 10% .

But fiber laser cutting machine almost consumes no material during processing and photoelectric conversion rate can reach 30%, which is more economic.
3.maintance
CO2 laser cutting machine laser has complex structure, inconvenient maintenance and high operation requirements,

but the optical fiber laser cutting machine has simpler maintenance, and high tolerance of dust, shocks , temperature and humidity in poor work environment.

Ⅱ、fiber laser cutting machine VS YAG laser cutting machine

1.process
The cost of YAG laser cutting machine is low, can cut high reflective material like aluminum, copper and nonferrous metal materials that fiber laser cutting machine can’t cut.

But most YAG laser cutting machine are of low power, can only cutting thin sheet materials which are under 8mm, and much slower than fiber laser cutting machine.

Fiber laser technology can achieve very high power in a very small package, covering a small area, saving space.
2.cost
YAG laser has been developed for decades with mature technology, thus the price of which is cheap. But with the popularity of fiber laser, this advantage is becoming weaker and weaker. What’s more, the power consumption of YAG laser is higher

3.maintance
There is no optical lens in the resonant cavity of fiber laser, taking the advantages of high stability and avoiding the adjustment and maintenance. So the replacement of device maintenance is much simpler than the traditional YAG laser.

In summary,we made a conclusion that, the advantages of fiber laser cutting machine are more obvious .

But in fact the three types of laser cutting machine have their own characteristics,

we should make a reasonable choice according to our own demand and budget in the practical application.

Welcome to contact us,if you have any questions about machine ,we will provide solution for you .

Manager sales:

Anne Zhang

Mob/whatsapp:+8615098735595 Skype:amyzhang1321 Email:xintian121@xtlaser.com

The advantage of fiber laser cutting machine-Anne

2018-03-03/in Company News, fiber laser tube cutting machine, Industry news /by Admin

The advantage of fiber laser cutting machine

1, high precision cutting:

So laser cutting machine positioning accuracy of 0.05mm, repeat positioning accuracy of 0.03 mm.

2, laser cutting machine narrow kerf:

So focusing a laser beam into a small spot, the focal point to achieve high power density, the material quickly heated to vaporization degree was evaporated to form holes.

With the beam and the material is relatively linear, so that the holes are continuously formed through a narrow slit, incision width is generally 0.10-0.20mm.

3, laser cutting machine smooth cutting surface:

So without burr cutting surface, cut surface roughness of the general control within Ra6.5.

4, laser cutting machine speed:

So cutting speeds up to 10m / min Maximum positioning speed up to 30m / min is much faster than the speed of the cutting line.

5, good quality laser cutting machine:

So sag non-contact cutting, trimming heat has little effect, basically no workpiece thermal deformation, completely avoid material formed when punching, slit generally does not require secondary processing.

6, do not damage the workpiece:

So laser cutting head is not in contact with the surface of the material to ensure not scratch the workpiece.

7, shape of the workpiece doesn’t effect it

So laser processing flexible, and can process any graphics, can cut pipes and other profiles.

8, laser cutting machine can cut a variety of materials processing:

So such as plastic, wood, PVC leather, textiles, glass and the like.

9, saving investment mold:

So laser processing without mold, no mold consumption, not repair of mold, mold replacement saving time, saving processing costs, reduce production costs, especially for machining large products.

10, saving material:

So can cut in different shapes with computer programming,, to maximize material utilization.

11, increase the speed of the sample factory:

So after the formation of product drawings, can carry our laser processing immediately, get kind of new products in the shortest possible time.

12, safety and environmental protection:

So laser processing waste, low noise, clean, safe, pollution-free, greatly improve the working environment.

Welcome to contact us:

Sales manager:

Anne Zhang

Mob/whatsapp:+86 15098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

How To Use And Maintenance Fiber Laser Cutting Machine -Anne

2018-01-31/in Company News /by Admin

How To Use And Maintenance Fiber Laser Cutting Machine -Anne

As we know fiber laser cutting machine is popular in the market ,and many customer want to know how to use and maintenance fiber laser cutting machine ,

So now we ,XT LASER,will share with you some skills about it -Fiber laser cutting machine

1) Always check strip, must ensure taut. Otherwise, the running of the problem, there might hurt people,

serious but also result in death.Strip seemingly small things, a problem or a little serious.

2) every six months to check the verticality of the track and the straightness of the machine and found that abnormal timely maintenance of debugging.

Do not do this, it is possible to cut out the effect is not how good, the error will increase, affecting the cutting quality. This is the most important.

3) weekly siphoning off the dust and dirt with a vacuum cleaner inside the machine, all electrical cabinet should be tightly closed and dust.

4) guide rails should always clean up and remove dust and other debris, to ensure the normal rack regular cleaning, add oil to ensure lubrication without debris.

Guide to regular cleaning and lubricating oil, there is also the motor on regular cleaning and lubricating the machine on the go will be able to walk better,

more accurate cutting, cutting out the product quality will improve

Thank you for your reading ,hope these skills can help you.

If you have any questions about machine ,warmly welcome to contact us

Sales Manager :

Anne Zhang

Mobile:+8615098735595

Email:xintian121@xtlaser.com

Skype:amyzhang1321

Stainless Steel Fiber Laser Cutting Machine for Decoration Industry-Anne

2018-01-23/in Company News, Fiber Laser Cutting Machine, Industry news /by Admin

Stainless Steel Fiber Laser Cutting Machine for Decoration Industry

Fiber laser cutting machine application

As a result of strong corrosion resistance, high mechanical properties, the surface not fade over time,Fiber laser cutting machine

the color with the angle of light having different color changes and other characteristics, stainless steel is used in decorative engineering industry.

For example, in a variety of top clubs, public recreation places and other local decoration,

curtain wall, hall wall, elevator decoration, signs advertising, front screens and other decorative materials applications material is stainless steel .

However, the stainless steel plate made of stainless steel products is a very complex technical process.-fiber laser cutting machine

The production process requires a lot of processes, such as cutting, folding, bending, welding and other mechanical processing.

Among them, the cutting process is a more important process.-fiber laser cutting machine

There are many kinds of stainless steel cutting traditional processing method, but low efficiency, poor quality of molding and seldom meet the needs of mass production.

At present, the stainless steel laser cutting machine – fiber laser cutting machine used in the metal processing industry

because of its good beam quality, high precision, small slit, smooth cut, flexible cutting graphics, etc., in the decoration industry is no exception.

Here we take a look at the stainless steel laser cutting machine in the decorative industry applications.

Fiber laser cutting machine is constantly improve the high-tech, information technology.

Relative to the traditional mechanical manufacturing technology, laser cutting is another revolution, resulting in a huge promoting role for stainless steel decoration engineering industry.

With the increasingly fierce market competition, the technology will play an increasingly important role, and bring huge economic benefits.

Details of fiber laser cutting machine: Charry

2017-12-27/in Fiber Laser Cutting Machine, Industry news /by Admin

Details of fiber laser cutting machine

Today,new customers have new questions for the fiber laser cutting machine.

So sharing with you for your reference:

1.For 0.25 to 1.75mm stainless steel,brass,aluminum,copper cutting
2.The size is 1.2*1.2m
3.For gas consumption

Firstly,for your cutting materials,all is high reflective material(reflect the laser from the material surface,is hard to absorb the laser)

The Nlight laser source is suitable for the materials,made in USA brand.

Its special for cutting high-reflective material. Cause inside of the Nlight laser source,there is one laser optical isolation,can avoid the laser reflect to the laser source to damage it.

Secondly,for your thickness, the maximum is 1.75mm,700w laser power can cut 1.5mm copper,2mm brass,3mm stainless steel,2.5mm aluminum.

According to our testing and experience,engineers suggest you to choose 1000w Nlight laser power.

Details of fiber laser cutting machine

Thirdly,for machine size,we have the model of 1.5*1.5m ,thats the most suitable for your size.
Attached the machine layout,you can check the 1515 model size.

This machine picture is 1515 model,this one will be sent to USA customer in next month,is on machine aging now.

And for fiber laser cutting machine,according to our testing,the limit cutting is not good for the machine using.
For example,5mm SS is the maximum cutting thickness of 1000w,if you need to cut a large quantity of 5mm SS,engineers suggest you choose 1500w.

So hope you take it into consideration.

And for most of our Middle East customers,they prefer to trust Germany brand,so they choose IPG laser source.
Attached the 1000w and 1500w IPG fiber laser cutting machine quotation list and specification.

Cause for Middle East customers,the higher temperature,then we will set one air conditioner on the machine control cabinet:

So if you are not sure,pls show us your specific needs.

Finally,if you have any questions,just tell us:

Email: xintian111@xtlaser.com

Whatsapp: +8618253165863

Error finding of fiber laser cutting head；Charry

2017-11-29/in Fiber Laser Cutting Machine /by Admin

Error finding of fiber laser cutting head

We use the Raytools laser cutting head,for now,95% Chinese suppliers use this brand.More stable than others.

But some customers do not know about the laser head,sometimes there will be with some problems,need to check it.

High nozzle temperature during machining

Failure reason

Firstly, offset in pairs.

Secondly, Protect lens pollution.

Thirdly,focus lens or collimated lens pollution.

Fourthly,Optical fiber pollution.

How to solve it?

Firstly, check whether the offset, if there is offset, to adjust.

Secondly,remove the protection lens inspection, pay attention to protect the lens seat after removal must use the paper to live cutting head leakage empty position. Do not remove the protective mirror seat after blowing gas.

Thirdly,Check the internal optical lens of cutting head.

Error finding of fiber laser cutting head

Abnormal alarm of Capacitance value

Failure reason

Firstly,The ceramic body with damaging and loosing.

Secondly,damaging and loosing.

Thirdly,The nozzle connection body touches the damage.

Fourthly,Signal line problem.

How to solve it?

Firstly,check whether the ceramic body, nozzle with damaging and loosing. if there is damaging or loosing, the replacement and reinforcement.

Secondly, after remove the ceramic body and nozzle, check the cutting head ceramic installation position contact. if there is damage, you need to contact the supplier for replacement.

Thirdly,Check if the signal cable is disconnected.

If there is no obvious damage, you can use the multimeter after the engineer under the guidance of the specific inspection.

Sharing the cutting video with you: