Příspěvky

10,000W laser cutting or plasma for sheet metal cutting?-Flora

/in /by

10000W laser cutting or plasma for sheet metal cutting?

10000W laser cutting or plasma for sheet metal cutting?

At present, many industries such as heavy industry are discussing and experimenting with the use of 10000w laser cutting to replace plasma cutting, and they have seen the better efficiency, effect and benefit brought by 10000w laser.
First, smaller kerf, saving sheet material
Because the laser beam focuses into a small spot, the laser slit is smaller for the same size plate, and the slit of the plasma cutting machine is slightly larger. Compared with plasma cutting, laser cutting can save 6-9% of material.
Second, non-destructive processing, environmental protection
The laser processing is flexible, and it can process any complex graphics, cut pipes and other profiles. In addition, laser cutting is a non-contact cutting to ensure that the workpiece is without scratch, the cutting edge is without affection of heat, there is basically no thermal deformation of the workpiece, and the processing process is green and pollution-free.
Plasma cutting will cause large or small damage to the workpiece. If there is a problem with the cutting nozzle of the plasma cutting machine during the cutting process, it will cause obvious defects to the plate, and the smoke and dust during the processing will pollute the environment.
Accelerated efficiency and doubled business
The development of new technologies must improve efficiency in order to create more value for users. On the premise of improving the processing quality, the processing efficiency of 10000w fiber laser cutting has also been doubled, allowing end users to complete more business volume in the same time.
Third, reduce costs and cut expenditures and increase benefits
If you want to improve corporate efficiency, you must not only increase revenue and increase revenue, but also know how to reduce costs and reduce expenditure. The 10000w fiber laser cutting can not only greatly improve the processing efficiency, but also greatly reduce the overall processing cost, allowing the terminal sheet metal processing users to reduce costs and generate income.

XT laser is manufacturer of laser  machines  since 2004, any inquiry, feel free to contact us:

Email: xintian131@xtlaser.com

Skype: XTlaser-Flora

Mobile/Whatsapp/Wechat:0086 18354256184

Web: www.xtlaser.com

Youtube Homepage:https://www.youtube.com/feed/my_videos

Fiber laser cutting machine helps the development of sheet metal industry

/in , , /by

Fiber laser cutting machine helps the development of sheet metal industry

Sheet metal industry is one of the application of laser processing is the most important market. Fiber laser cutting machine helps sheet metal industry

In order to adapt to the development trend of the international market, all processing technology transformation.

For the laser cutting machine, laser welding machine, laser marking machine.

laser equipment in the application of the sheet metal industry has provided a broad space

fiber laser cutting machine

Disadvantages of traditional sheet metal processing.

So traditional sheet metal processing technology:

shearing – punching – bending – welding process

Or flame plasma cutting – bending – welding process.
In the face of many varieties, small batch.

Then customization, high quality, short delivery time,

Traditional sheet metal processing method has obvious shortcomings:

1. (numerical control) shearing machine can only.Fiber laser cutting machine helps sheet metal industry

So it use  in sheet metal processing with straight cutting because of its main line cutting.

2. (numerical control/brick) punching machine has restrictions on the cutting of steel plates with a thickness of more than 1.5mm.

So with poor surface quality, high cost and high noise and which is not conducive to environmental protection;

3. Flame cutting.

As the original traditional cutting mode, is large in thermal deformation.

But wide slot and waste material during cutting, Then which is only suitable for rough machining.

4. High pressure water cutting process is slow.

Causing serious pollution and high consumption cost.

Advantages of fiber laser cutting machine.

Aiming at the existing problems of traditional sheet metal cutting.

And the demand for laser cutting so is also increasing.

1, laser cutting, high degree of flexibility, cutting speed, high efficiency.

But short production cycle, whether simple or complex parts.

So can be used to achieve a rapid prototyping laser cutting;

2. Narrow cutting.

Then good cutting quality but high degree of automation, simple operation.

low labor intensity, safe and environmental protection;

3. So the automatic cutting and nesting of cutting can  realize.

And the material utilization rate can be improved, without tool wear and material adaptability;

4. Low production cost and good economic benefit.

Laser cutting machine application in sheet metal industry-Wendy

/in , /by

Laser cutting machine application in sheet metal industry

In the automotive industry, the shape of many sheet metal structures is very complex. Therefore, the traditional auto parts processing methods have not been able to keep up with the pace of the development of the times. So fiber laser cutting machine application in automobile and sheet metal industry.

 

laser cutting process

laser cutting process

In order to complete this process better, the appearance and application of the fiber laser cutting machine is particularly important.

As we all know, automotive parts and materials manufacturing and manufacturing is difficult.

In order to ensure the safety of drivers, we must be precise and accurate. And sheet metal materials must have good technological performance. Accordingly, it is more prudent for the selection of machining equipment for metal auto parts.

Fiber laser cutting machine is specially suitable for sheet metal processing industry.

Its advantages such as high stability, high accuracy and fast speed play an important role in the auto parts processing market. Before this, the optical fiber laser cutting machine is easy to operate. And only needs the cooperation of the computer. And the machine to complete the processing of all kinds of exquisite parts.

Fiber laser cutting machine because it is used in optical fiber transmission, the flexible degree is greatly improved.

The fault point less, maintenance is convenient, faster. So there is a very big advantage in cutting sheet metals within 4mm optical fiber cutting machine, but the influence of by solid laser wavelength in cutting plate when the quality is slightly inferior to many the. The wavelength of the optical fiber laser cutting machine is 1.06um, and it is not easy to be absorbed by non-metallic materials, so it can not cut non-metallic materials. Compared with other types of lasers, the photoelectric conversion rate of fiber lasers is more than 25%. In the operation and operation, the advantages of fiber laser are more obvious than that of power consumption, cooling system and other economic considerations.

Email:xintian112@xtlaser.com

Whatsapp/Wechat: +86 13176671529

Skype: XT Wendy Ning